Vishay IRF830A Type N-Channel Power MOSFET, 5 A, 500 V Enhancement, 3-Pin TO-220AB

RS stock no.:: 542-9434P
Mfr. Part No.:: IRF830APBF
Manufacturer:: Vishay

Vishay IRF830A Type N-Channel Power MOSFET, 5 A, 500 V Enhancement, 3-Pin TO-220AB

Image representative of range

Stock information currently inaccessible

Alternative

This product is not currently available. Here is our alternative recommendation.

Vishay IRF830A Type N-Channel Power MOSFET, 5 A, 500 V Enhancement, 3-Pin TO-220AB IRF830APBF

RS stock no.: 178-0834

Each (In a Tube of 50)

R 1,247.70

(exc. VAT)

R 1,434.86

(inc. VAT)

RS stock no.:: 542-9434P
Mfr. Part No.:: IRF830APBF
Manufacturer:: Vishay

Specification

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Vishay
	Channel Type	Type N
	Product Type	Power MOSFET
	Maximum Continuous Drain Current Id	5A
	Maximum Drain Source Voltage Vds	500V
	Package Type	TO-220AB
	Series	IRF830A
	Mount Type	Through Hole
	Pin Count	3
	Maximum Drain Source Resistance Rds	1.4Ω
	Channel Mode	Enhancement
	Forward Voltage Vf	1.5V
	Maximum Gate Source Voltage Vgs	30V
	Typical Gate Charge Qg @ Vgs	24nC
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	74W
	Maximum Operating Temperature	150°C
	Length	10.41mm
	Height	9.01mm
	Width	4.7mm
	Standards/Approvals	RoHS
	Automotive Standard	No

	Select all
	Brand Vishay
	Channel Type Type N
	Product Type Power MOSFET
	Maximum Continuous Drain Current Id 5A
	Maximum Drain Source Voltage Vds 500V
	Package Type TO-220AB
	Series IRF830A
	Mount Type Through Hole
	Pin Count 3
	Maximum Drain Source Resistance Rds 1.4Ω
	Channel Mode Enhancement
	Forward Voltage Vf 1.5V
	Maximum Gate Source Voltage Vgs 30V
	Typical Gate Charge Qg @ Vgs 24nC
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 74W
	Maximum Operating Temperature 150°C
	Length 10.41mm
	Height 9.01mm
	Width 4.7mm
	Standards/Approvals RoHS
	Automotive Standard No

Vishay IRF830A Series Power MOSFET, 500V Maximum Drain Source Voltage, 5A Maximum Continuous Drain Current - IRF830APBF

This power MOSFET is a through-hole N-channel enhancement device designed for high-voltage switching in industrial electronics. It is intended for applications where robust drain-to-source voltage handling and moderate current capacity are required, providing a Compact solution for power switching on heatsinked assemblies.

Features and Benefits:

• 500V Vds enables high-voltage switching in industrial circuits • 5A continuous drain current supports steady load operation • 1.4Ω Rds(on) minimises conduction losses under load • 74W maximum power dissipation for effective thermal handling • 24nC typical gate charge allows predictable switching behaviour • Vgs ±30V rating protects gate under control-signal excursions

Applications

• Suitable for high-voltage motor drive front-ends • Ideal for switch-mode power supplies in industrial equipment • Used for power conversion modules requiring through-hole mounting • Can be used for relay-replacement switching in control panels

What mounting method is required for reliable heat removal?

The device is supplied in a TO-220AB package for through-hole installation and benefits from a heatsink attached to the tab to achieve rated power dissipation.

How does the gate charge affect switching performance?

A typical gate charge of 24nC at rated conditions determines required driver strength and influences switching losses and rise/fall times in high-speed applications.

What temperature range can it operate within?

The component is rated to function from -55°C up to 150°C, allowing use across harsh industrial thermal environments.

What protection should be considered for gate and drain overstress?

Designers should include gate protection to remain within ±30V and implement snubbing or clamp networks to limit transients on the drain at high voltages.