Sign up
Recently searched

    Acim Jouanin Formable Coil Heater, 1.65m, 1 kW, 230 V ac

    Image representative of range

    View this category
    Bulk discount available

    Price (Excl VAT) Each**

    R 7 592,16

    (exc. VAT)

    R 8 730,98

    (inc. VAT)

    Select or type quantity
    On back order for despatch 2024/12/30*

    * Delivery dates may change based on your chosen quantity and delivery address.

    Not Available for premium delivery
    Units
    Per unit
    1 - 4R 7 592,16
    5 - 9R 7 402,36
    10 +R 7 180,29

    **price indicative

    RS stock no.:
    374-3160
    Mfr. Part No.:
    RCF/TC1000
    Manufacturer:
    Acim Jouanin

    Cold-formed heating resistors


    Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.
    The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.
    The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.
    The heating length must be determined according to the part to be heated.
    A formed CFR may not be reformed.


    Strip Heating Elements

    Note

    To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them

    Warning

    For reasons of safety the heater block and/or heater sheath must be bonded to earth

    Approvals

    UL Recognised; CSA Certified

    Related links