Sensata / Cynergy3 SSF67 Series Vertical Stainless Steel Float Switch, Float, Direct Load
- RS stock no.:
- 492-8924
- Mfr. Part No.:
- SSF67A25B125
- Manufacturer:
- Sensata / Cynergy3
5 Available from UK/Europe in 4–6 working days for collection or delivery to major cities (Heavy, hazardous or lithium product excluded. Delivery T&C's apply)
Not Available for premium delivery
Added
Price (Excl VAT) Each
R 5 391,34
(exc. VAT)
R 6 200,04
(inc. VAT)
| Units | Per unit |
| 1 - 5 | R 5 391,34 |
| 6 + | R 5 256,56 |
- RS stock no.:
- 492-8924
- Mfr. Part No.:
- SSF67A25B125
- Manufacturer:
- Sensata / Cynergy3
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Dual Position Stainless Steel Float Switch
Designed to give the user a number of switching options to cater for a variety of system requirements. These switches are most suited for use with aggressive liquids and hygienic applications.
Two Independent Switching Points
Lower Float Make on Fall, and Upper Float Make on Rise
Minimum Fluid SG: 0.80
Switch Differential (each level) Nominal: 1mm
Suitable for High and Low Level Alarm and Control Signal
Stainless Steel 316L for Use with Aggressive Liquids, or in Hygienic Applications
Vertical Mounting, M16 x 2 Thread
Temperature Range: -20 to +135°C
Nitrile Gasket
’Safe Area’ for Use in Petrochemical, Storage, and Process Control Applications
Lower Float Make on Fall, and Upper Float Make on Rise
Minimum Fluid SG: 0.80
Switch Differential (each level) Nominal: 1mm
Suitable for High and Low Level Alarm and Control Signal
Stainless Steel 316L for Use with Aggressive Liquids, or in Hygienic Applications
Vertical Mounting, M16 x 2 Thread
Temperature Range: -20 to +135°C
Nitrile Gasket
’Safe Area’ for Use in Petrochemical, Storage, and Process Control Applications
Note
All ratings in tech. spec. table are for resistive loads only
Warning
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Specification
Attribute | Value |
|---|---|
| Device Type | Float |
| Mounting Type | Vertical |
| Switch Output | Direct Load |
| Body Material | Stainless Steel |
| Minimum Operating Temperature | -20°C |
| Maximum Operating Temperature | +135°C |
| Maximum Current | 600 mA |
| Maximum Pressure | 10bar |
| Gasket Material | Nitrile |
| Series | SSF67 |
- RS stock no.:
- 492-8924
- Mfr. Part No.:
- SSF67A25B125
- Manufacturer:
- Sensata / Cynergy3