Microchip, Ethernet Controller, 3.3 V 100 Mbps BIU, 48-Pin 3.3 V LQFP
- RS stock no.:
- 177-3534
- Mfr. Part No.:
- KSZ8851-16MLLI
- Manufacturer:
- Microchip
Image representative of range
Subtotal (1 tray of 250 units)*
R 22 635,25
(exc. VAT)
R 26 030,50
(inc. VAT)
FREE delivery for orders over R 1,500.00
Temporarily out of stock
- Shipping from 18 March 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit | Per Tray* |
|---|---|---|
| 250 + | R 90.541 | R 22,635.25 |
*price indicative
- RS stock no.:
- 177-3534
- Mfr. Part No.:
- KSZ8851-16MLLI
- Manufacturer:
- Microchip
Specification
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Microchip | |
| Product Type | Ethernet Controller | |
| Maximum Data Rate | 100Mbps | |
| Communication Mode | Full Duplex/Half Duplex | |
| Loopback Mode | Internal | |
| Interface Type | BIU | |
| Standard Supported | IEEE 802.3u, IEEE | |
| Mount Type | Surface | |
| Package Type | LQFP | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 48 | |
| Minimum Operating Temperature | 85°C | |
| Maximum Operating Temperature | -40°C | |
| Length | 7.1mm | |
| Width | 7.1 mm | |
| Height | 1.6mm | |
| Minimum Supply Voltage | 3.3V | |
| Standards/Approvals | No | |
| Supply Current | 85mA | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Microchip | ||
Product Type Ethernet Controller | ||
Maximum Data Rate 100Mbps | ||
Communication Mode Full Duplex/Half Duplex | ||
Loopback Mode Internal | ||
Interface Type BIU | ||
Standard Supported IEEE 802.3u, IEEE | ||
Mount Type Surface | ||
Package Type LQFP | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 48 | ||
Minimum Operating Temperature 85°C | ||
Maximum Operating Temperature -40°C | ||
Length 7.1mm | ||
Width 7.1 mm | ||
Height 1.6mm | ||
Minimum Supply Voltage 3.3V | ||
Standards/Approvals No | ||
Supply Current 85mA | ||
Automotive Standard No | ||
- COO (Country of Origin):
- US
The KSZ8851 is a single-port controller chip with a SPI or 8-/16-/32-bit non-PCI CPU interface. Available in 32-/48-/128-pin packages, the KSZ8851 is for applications requiring cost-effective, high-throughput Ethernet connectivity in traditional embedded systems with MCUs or MPUs.
Integrated MAC and PHY Ethernet Controller
Designed for high performance and high throughput applications
Supports 10BASE-T/100BASE-TX
Supports full-duplex flow control and half-duplex back pressure collision flow control
Supports DMA-slave burst data read and write transfers
Supports IP Header (IPv4)/TCP/UDP/ICMP checksum generation and checking
Supports IPv6 TCP/UDP/ICMP checksum generation and checking
Automatic 32-bit CRC generation and checking
Simple SRAM-like host interface easily connects to most common embedded MCUs.
Supports multiple data frames for transmit and receive without address bus and byte-enable signals
Supports both Big- and Little-Endian processors
Related links
- Microchip KSZ8851-16MLLI 100Mbps 100BaseTX BIU 48-Pin LQFP
- Microchip LAN7500-ABZJ 1000Mbps 1000BaseT 10BaseT 3.3 V, 56-Pin QFN
- Microchip LAN7500I-ABZJ 1000Mbps 1000BaseT 10BaseT 3.3 V, 56-Pin QFN
- WIZnet Inc W5100 100Mbps MII 3.3 V, 80-Pin LQFP
- WIZnet Inc RTL8201CP-VD-LF 10Mbps MII 3.3 V, 48-Pin LQFP
- Microchip LAN9500A-ABZJ 100Mbps MII 3.3 V, 56-Pin QFN
- Microchip LAN9252/PT 100Mbps 3.3 V, 64-Pin TQFP-EP
- Microchip LAN9252I/ML 100Mbps MDI MII Host Bus 64-Pin QFN