WAGO 788 Series Interface Relay, DIN Rail, 24V ac Coil, DPDT, 34mA
- RS stock no.:
- 180-3040
- Mfr. Part No.:
- 788-512
- Manufacturer:
- WAGO
Subtotal (1 unit)*
R 245,75
(exc. VAT)
R 282,61
(inc. VAT)
FREE delivery for orders over R 1,500.00
In Stock
- Plus 46 unit(s) shipping from 01 June 2026
- Plus 60 unit(s) shipping from 16 July 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | R 245.75 |
*price indicative
- RS stock no.:
- 180-3040
- Mfr. Part No.:
- 788-512
- Manufacturer:
- WAGO
Specification
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | WAGO | |
| Coil Voltage | 24V ac | |
| Product Type | Interface Relay | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Series | 788 | |
| Terminal Type | Cage Clamp | |
| Switching Current | 8A | |
| Switching AC Voltage | 250V ac | |
| Minimum Operating Temperature | -25°C | |
| Switching DC Voltage | 24V dc | |
| Coil Current | 34mA | |
| Contact Material | Silver Alloy | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | EN 61373 | |
| Width | 15mm | |
| Length | 15mm | |
| Height | 54mm | |
| Select all | ||
|---|---|---|
Brand WAGO | ||
Coil Voltage 24V ac | ||
Product Type Interface Relay | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Series 788 | ||
Terminal Type Cage Clamp | ||
Switching Current 8A | ||
Switching AC Voltage 250V ac | ||
Minimum Operating Temperature -25°C | ||
Switching DC Voltage 24V dc | ||
Coil Current 34mA | ||
Contact Material Silver Alloy | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals EN 61373 | ||
Width 15mm | ||
Length 15mm | ||
Height 54mm | ||
- COO (Country of Origin):
- DE
Relay module, Nominal input voltage: 24 VAC, 2 changeover contacts, Limiting continuous current: 8 A, Red status indicator, Module width: 15 mm
Reinforced insulation between coil and contacts
A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
Related links
- WAGO 788 Series Interface Relay 12V dc Coil 8A Load
- WAGO 788 Series Relay Module 24V ac Coil 2-Pole, 8A Load
- WAGO 788 Series Relay Module 230V ac Coil 2-Pole, 8A Load
- WAGO 788 Series Relay Module 48V dc Coil 2-Pole, 8A Load
- WAGO 788 Series Relay Module 110V dc Coil 2-Pole, 8A Load
- WAGO 788 Series Relay Module 115V ac Coil 2-Pole, 8A Load
- ABB CR-P Series Interface Relay 24V dc Coil 8A Load
- Phoenix Contact RIF Series Interface Relay 24V ac Coil 8A Load