onsemi 8-Pin -10 V 8 V
- RS stock no.:
- 124-5438
- Mfr. Part No.:
- UAA2016PG
- Manufacturer:
- onsemi
Image representative of range
Bulk discount available
Subtotal (1 tube of 50 units)*
R 969,75
(exc. VAT)
R 1 115,20
(inc. VAT)
Add 100 units to get free delivery
Temporarily out of stock
- 150 unit(s) shipping from 13 May 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit | Per Tube* |
|---|---|---|
| 50 - 50 | R 19.395 | R 969.75 |
| 100 - 200 | R 18.91 | R 945.50 |
| 250 - 450 | R 18.343 | R 917.15 |
| 500 - 950 | R 17.609 | R 880.45 |
| 1000 + | R 16.905 | R 845.25 |
*price indicative
- RS stock no.:
- 124-5438
- Mfr. Part No.:
- UAA2016PG
- Manufacturer:
- onsemi
Specification
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | onsemi | |
| Product Type | Voltage Controller | |
| Number of Channels | 1 | |
| Mount Type | Through Hole | |
| Pin Count | 8 | |
| Minimum Supply Voltage | -10V | |
| Maximum Supply Voltage | 8V | |
| Standards/Approvals | RoHS | |
| Height | 9.1mm | |
| Series | UAA2016 | |
| Width | 10.92 mm | |
| Length | 10.16mm | |
| Maximum Operating Temperature | 85°C | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand onsemi | ||
Product Type Voltage Controller | ||
Number of Channels 1 | ||
Mount Type Through Hole | ||
Pin Count 8 | ||
Minimum Supply Voltage -10V | ||
Maximum Supply Voltage 8V | ||
Standards/Approvals RoHS | ||
Height 9.1mm | ||
Series UAA2016 | ||
Width 10.92 mm | ||
Length 10.16mm | ||
Maximum Operating Temperature 85°C | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CZ
Zero Voltage Switching Controllers
Zero-voltage switching Triac trigger/driver ciruits which facilitate RFI-free power regulation of resistive loads.
The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.