Schneider Electric Grey Plastic Vent Grille, 63 x 63mm

Brought to you in a set of two, these pressure compensating plugs help to protect cabinets from condensation caused by temperature changes. Some may refer to these airing grilles as air vent covers, this is because of the nature of their role - they are used as a cover to mount over openings that have been produced in walls to create an airflow and ventilation.

• Forms part of the ClimaSsys range of products
• Compatible for use with Thalassa TBS, Thalassa PLM and Thalassa PLS
• The type of components is a plastic ventilation louvre, most would use the component as a thermal management accessory
• The fixing mode is by screws
• Comprised of a strong and hardwearing polyamide material
• Cut-out dimensions are 38 mm
• Dimensions - H63 mm x w63 mm x D15mm (this is the thread size)
• Holds an ingress protection of IP45, this means that the airing grilles are protected against solid objects larger than 1mm (wires, nails, screws, larger insects and other potentially invasive small objects such as tools/small. This IP rating also means that the pressure compensating plugs are protected against low-pressure jets (6.3 mm) of directed water from any angle (limited ingress permitted with no harmful effects
• Untreated with a built-in, integrated filter