Norgren Pressure Switch, G 1/8 -1bar to 10bar

Need a reliable way to keep pressure in check? Add this pressure switch from IMI Norgren to your pneumatic setup. It allows for the redistribution of pressure across the system as needed so it remains stable overall. You can use the device to control the flow of filtered, lubricated and non-lubricated compressed air according to set parameters. As it handles between -1 and 10 bar, you can count on it as a reliable workhorse for lower-pressure tasks. A digital LED display is on hand to let you easily see the current level and switching status.

• Standard G1/8 port for straightforward installation
• Fast response time of ±2.5ms
• Shock-proof up to 100g (980 m/s2) and vibration-proof to 88g (at 10 - 55Hz), so cope with industrial machinery
• Flexible mounting position to suit your setup
• Does the job in an operating temperature range between 0°C and +60°C

• Breweries and bottling plants
• Chemical processing facilities
• Research laboratories

It's IP65-rated, which indicates it's protected against low-pressure jets of water from all directions.

The body is made from polycarbonate, so it's strong and impact-resistant, making it ideal for heavy-industrial environments.