M6 34mm Bright Zinc Plated Steel Round U-Bolt

When choosing the right U Bolt, there are certain things to consider. Before you make a purchase make sure you verify the measure of the height and inside diameter as, without it, it will not fit the needs of your applications.

We are proudly introducing our own branded RS PRO Bright Zinc Plated U Bolt is coming with a set of nuts and washers.

Our Zinc round bend-form makes them ideal for a variety of pipework to fixtures or ceilings.

The galvanised material is protecting against rust and corrosion while keeping your budget under control as you are getting nuts and washers in a bag.

U Bolts are widely known and used for:

• Installation for TV aerials or Satellite dishes


• Marine Boat hardware


• Automotive


• Plumbing


• Supporting pipework and pipes which fluids and gasses pass-through


• Attaching various items to poles and beams


• Installing Cables to the Walls


• Using U Bolts as concrete fasteners is not uncommon.


• Mechanical fixings

What happens if you over tighten U Bolts?

If over tighten happens, this will irrevocably damage the threads of the bolt and the nut, therefore be careful during the task.

How to install U Bolts?

Although the installation process is relatively easy to follow, it is worth to remember about the following steps.

1. Firstly, remove both nuts from each side of your U Bolt.

2. If you are planning to use the U Bolt around the pipe you are connecting and thread the bolt's ends through the holes, the next step is to make sure the nuts on each outer end of the bolts are tightened either by some power tool or wrench to tighten the nuts.

3. Using a U Bolt guide is always a good idea but remember to measure spacing to fit its specifications before tightening nuts.

RS PRO is our family brand to go-to and brings you a wide range for high-quality and high-value products to support your project. Trusted by engineers all over the world, every part of every RS PRO product is always rigorously tested against demanding industry standards. We are only giving the RS PRO seal of approval if we are confident of their exceptional quality, which means you can be convinced too.

2 nuts and washers