Infineon TLE94613ESXUMA1 System-On-Chip 24-Pin TSDSO-24
- RS stock no.:
- 244-2898
- Mfr. Part No.:
- TLE94613ESXUMA1
- Manufacturer:
- Infineon
Image representative of range
Bulk discount available
View bulk pricing optionsSubtotal (1 pack of 2 units)*
R 111,07
(exc. VAT)
R 127,73
(inc. VAT)
FREE delivery for orders over R 1,500.00
Temporarily out of stock
- 2,888 left, ready to ship from another location
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit | Per Pack* |
|---|---|---|
| 2 - 8 | R 55.535 | R 111.07 |
| 10 - 98 | R 54.145 | R 108.29 |
| 100 - 248 | R 52.52 | R 105.04 |
| 250 - 498 | R 50.42 | R 100.84 |
| 500 + | R 48.405 | R 96.81 |
*price indicative
- RS stock no.:
- 244-2898
- Mfr. Part No.:
- TLE94613ESXUMA1
- Manufacturer:
- Infineon
Specification
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Infineon | |
| Product Type | System-On-Chip | |
| Mount Type | Surface | |
| Package Type | TSDSO-24 | |
| Pin Count | 24 | |
| Interface Type | LIN, CAN | |
| Minimum Supply Voltage | -0.3V | |
| Maximum Supply Voltage | 28V | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 150°C | |
| Series | TLE9461-3ES | |
| Length | 8.65mm | |
| Height | 3.9mm | |
| Standards/Approvals | ISO 11898-2:2016, RoHS | |
| Automotive Standard | AEC-Q101, AEC-Q100 | |
| Select all | ||
|---|---|---|
Brand Infineon | ||
Product Type System-On-Chip | ||
Mount Type Surface | ||
Package Type TSDSO-24 | ||
Pin Count 24 | ||
Interface Type LIN, CAN | ||
Minimum Supply Voltage -0.3V | ||
Maximum Supply Voltage 28V | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 150°C | ||
Series TLE9461-3ES | ||
Length 8.65mm | ||
Height 3.9mm | ||
Standards/Approvals ISO 11898-2:2016, RoHS | ||
Automotive Standard AEC-Q101, AEC-Q100 | ||
The Infineon TLE94613ESXUMA1 device is designed for various CAN automotive applications as main supply for the microcontroller and as interface for a CAN bus network including the CAN Partial Networking feature. To support these applications, the System Basis Chip (SBC) provides the main functions, such as a 5 V lowdropout voltage regulator (LDO) for e.g. a microcontroller supply, another 5 V low-dropout voltage regulator with off-board protection for e.g. sensor supply, a HS-CAN transceiver supporting CAN FD and CAN Partial Networking (incl. FD tolerant mode) for data transmission, a high-voltage GPIO with embedded protective functions and a 16-bit Serial Peripheral Interface (SPI) to control and monitor the device.
Fully compliant to “Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications” Revision 1.3, 2012-05-04
Charge pump-Output for N-channel MOSFET reverse-polarity protection with integrated spread spectrum modulation feature for optimum EMC performance
Universal High-Voltage Wake Input for voltage level monitoring and wake detection
General Purpose High-Voltage In- and Output (GPIO) configurable as Fail Output, Wake Input, Low-Side switch or High-Side switch
HIgh-Voltage Measurement Function as alternate pin assignment
Fail Outputs for Fail-Safe signalization
Configurable wake-up sources
Reset Output & Interrupt Output