Moflash LEDA125 Series Amber Buzzer Beacon, 230 V, IP65, Wall Mount, 90dB at 1 Metre

Suitable for fire, security and industrial applicationsThree flash rates; continuously 'ON', 'Rapid Flash' at 120 fpm or 'Standard' at 60 fpm2 piezo sounders in base synchronised with flash rateDC units allow for termination inside the base enclosure

This Moflash buzzer beacon provides an audible and visual signal to alert you in case of fire, security breaches or other emergency situations. The beacon has three light modes: continuously ON, rapid flash (120Hz) and standard flash (60Hz). Select which one you want via a DIP (dual in-line package) switch mounted on the lens side on the printed circuit board (PCB). The base of the beacon/buzzer houses two piezo sounders that are synchronised to the light mode. This means the alarm sound and flash fire at the same time, making for a highly noticeable signal.

• Loud 90dB alarm sound is noticeable even in noisy settings
• Yellow lens for high visibility
• Wide operating temperature range of -20°C to +45°C to cope with a variety of environments

• Office buildings
• Construction sites
• Laboratories
• Cold-storage units

The volume of a sounder beacon is normally between 5 and 15 decibels (dB) above ambient noise level. This may vary depending on the number of staff, the noise of machinery and the size of the area you're covering.

LED/Buzzer