Omron Tension/Gripper, ER1022 Series
- RS stock no.:
- 214-6706
- Mfr. Part No.:
- 44506-4700 SM06-TG00
- Manufacturer:
- Omron
Subtotal (1 unit)*
R 1 858,74
(exc. VAT)
R 2 137,55
(inc. VAT)
FREE delivery for orders over R 1,500.00
Temporarily out of stock
- 99 unit(s) shipping from 19 May 2026
- Plus 10 unit(s) shipping from 16 June 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | R 1,858.74 |
*price indicative
- RS stock no.:
- 214-6706
- Mfr. Part No.:
- 44506-4700 SM06-TG00
- Manufacturer:
- Omron
Specification
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Omron | |
| Accessory Type | Tension/Gripper | |
| Product Type | Rope Tensioner System Component | |
| Series | ER1022 | |
| Select all | ||
|---|---|---|
Brand Omron | ||
Accessory Type Tension/Gripper | ||
Product Type Rope Tensioner System Component | ||
Series ER1022 | ||
Omron ER1022 Series Rope Tensioner System Component, Tension/Gripper Accessory Type - 44506-4700 SM06-TG00
This rope tensioner system component provides a stainless‑steel gripper used to set and maintain rope tension in long‑span safety rope installations. Designed for industrial automation and machinery safety environments, it integrates with rope‑pull emergency‑stop arrangements to deliver consistent tensioning and simple field servicing.
Features & Benefits
• Max rope span 125 m supports extensive protection coverage
• Tensioning force to run position 130 N typical for reliable actuation
• Stainless‑steel construction resists corrosion in wash‑down areas
• Mounting with M5 screws ensures secure, repeatable fixing
• Vibration‑tolerant operation reduces nuisance tripping
• Compatible with 4N/C + 2N/O switch configurations for safety circuits
• Tensioning force to run position 130 N typical for reliable actuation
• Stainless‑steel construction resists corrosion in wash‑down areas
• Mounting with M5 screws ensures secure, repeatable fixing
• Vibration‑tolerant operation reduces nuisance tripping
• Compatible with 4N/C + 2N/O switch configurations for safety circuits
**Applications**
• Suitable for conveyor‑system perimeter guarding in factories
• Ideal for use around rotating machinery hazard zones
• Used with emergency rope‑pull stop installations across long runs
• Can be used for automated line‑stop systems in assembly plants
• Ideal for use around rotating machinery hazard zones
• Used with emergency rope‑pull stop installations across long runs
• Can be used for automated line‑stop systems in assembly plants
What environmental conditions can this unit withstand?
The component is built to IP67, allowing water wash‑down cleaning and operation between −25 to 80 °C.
How is rope support arranged for long installations?
Eyebolts or supports are recommended every ≤3 m with rope supports no more than 500 mm from the switch attachment point.
What mounting and hardware requirements exist?
Fixing requires four M5 screws tightened to a specified torque and appropriate M20 wiring entries for cable glands.
How does the device help maintain correct rope tension?
The gripper works with a tension indicator and spring/turnbuckle hardware to set mid‑position tension and allow routine re‑tensioning.
What electrical switching capability should be expected?
The assembly interfaces with safety contacts rated for inductive switching at AC up to 240 V/3 A and DC at 24 V/2.5 A.