onsemi NCP1623CDR2G, Power Factor Controller IC 8-Pin, SOIC-8 11.25 V
- RS stock no.:
- 254-7618
- Mfr. Part No.:
- NCP1623CDR2G
- Manufacturer:
- onsemi
Image representative of range
Bulk discount available
Subtotal (1 pack of 5 units)*
R 105,91
(exc. VAT)
R 121,795
(inc. VAT)
Stock information currently inaccessible - Please check back later
Units | Per unit | Per Pack* |
|---|---|---|
| 5 - 5 | R 21.182 | R 105.91 |
| 10 - 95 | R 20.652 | R 103.26 |
| 100 - 245 | R 20.032 | R 100.16 |
| 250 - 495 | R 19.23 | R 96.15 |
| 500 + | R 18.46 | R 92.30 |
*price indicative
- RS stock no.:
- 254-7618
- Mfr. Part No.:
- NCP1623CDR2G
- Manufacturer:
- onsemi
Specification
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | onsemi | |
| Product Type | Power Factor Controller IC | |
| Start-up Supply Current | 50μA | |
| Maximum Source Current | 26.25μA | |
| Sub Type | Power Factor Controller IC | |
| Maximum Sink Current | 0.45μA | |
| Mount Type | Surface | |
| Package Type | SOIC-8 | |
| Minimum Supply Voltage | 9.75V | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 11.25V | |
| Minimum Operating Temperature | -40°C | |
| Standards/Approvals | JEDEC | |
| Width | 4 mm | |
| Height | 1.75mm | |
| Length | 5mm | |
| Series | NCP1623 | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | AEC-Q2, AEC-Q3, AEC-Q100 | |
| Select all | ||
|---|---|---|
Brand onsemi | ||
Product Type Power Factor Controller IC | ||
Start-up Supply Current 50μA | ||
Maximum Source Current 26.25μA | ||
Sub Type Power Factor Controller IC | ||
Maximum Sink Current 0.45μA | ||
Mount Type Surface | ||
Package Type SOIC-8 | ||
Minimum Supply Voltage 9.75V | ||
Pin Count 8 | ||
Maximum Supply Voltage 11.25V | ||
Minimum Operating Temperature -40°C | ||
Standards/Approvals JEDEC | ||
Width 4 mm | ||
Height 1.75mm | ||
Length 5mm | ||
Series NCP1623 | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard AEC-Q2, AEC-Q3, AEC-Q100 | ||
The ON Semiconductor NCP series of a controller designed to drive PFC boost stages which is based on an innovative valley synchronized frequency fold back method, it operates in critical conduction mode until the power drops below a threshold level. The PFC controller enters discontinuous conduction mode with increased dead-time as the load further decay. It maximizes the efficiency at both nominal and light loads.
Maximizes the efficiency at both nominal and light loads
Power factor correction
Zero current detection via drain sensing