Brodersen Controls Level Relay - DIN Rail Mount, 24 V dc 2

The Brodersen Controls MXL-10 series liquid level relay is a dual input and DIN rail mount device. This is used for most conductive fluids. It has a 24VDC supply voltage. It can control/monitor level conducting fluids via 2 wire probes. The conductivity will differ from fluid to fluid, the sensitivity can be adjusted on the front panel, to adjust the reaction time form the time the actual level is registered to the relay being energised/de-energised. This liquid relay is available in Up/Down, Minimum, Maximum and Fill/Empty variations. This device is straightforward to install and safe to use.

Sensitivity adjustable on input between 5kohm and 50kohm
Response time adjustable from 0.1 second to 5 seconds
Ambient temperature ranges between -20°C and 55°C
SPDT output
Automatic locking (latch)
LED supply and output indications

Liquid level relays (conductive level sensors) are used in a wide variety of applications, including waste water management and the monitoring and management of corrosive liquid media and designed specifically to provide for the: Monitoring and control of liquid levels
Protection of pumps against dry running
Ability to detect liquid leaks in a system
Control of media mixing ratios
Control of liquid levels

IP20 rated