STMicroelectronics Inductor Switch Boost Controller, 37 V Output, 20 mA PWM
- RS stock no.:
- 188-9274P
- Mfr. Part No.:
- STLD40DPUR
- Manufacturer:
- STMicroelectronics
Image representative of range
Bulk discount available
Subtotal 5 units (supplied on a continuous strip)*
R 320,15
(exc. VAT)
R 368,15
(inc. VAT)
Add 26 units to get free delivery
Temporarily out of stock
- Shipping from 03 August 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 5 - 9 | R 64.03 |
| 10 - 24 | R 62.11 |
| 25 - 99 | R 59.63 |
| 100 + | R 57.24 |
*price indicative
- RS stock no.:
- 188-9274P
- Mfr. Part No.:
- STLD40DPUR
- Manufacturer:
- STMicroelectronics
Specification
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | STMicroelectronics | |
| Product Type | Display Driver | |
| Output Voltage | 37 V | |
| Input Voltage | 3.0 to 5.5 V | |
| Mount Type | Surface Mount | |
| Sub Type | Inductor Switch Boost Controller | |
| Dimming Operation | PWM | |
| Terminal Type | QFN8 | |
| Input Voltage Type | DC | |
| LED Voltage | 37 V | |
| Driver Current | 20 mA | |
| Series | STLD40D | |
| Number of Outputs | 1 | |
| Standards/Approvals | RoHS | |
| Primary Type | Boost Converter | |
| Select all | ||
|---|---|---|
Brand STMicroelectronics | ||
Product Type Display Driver | ||
Output Voltage 37 V | ||
Input Voltage 3.0 to 5.5 V | ||
Mount Type Surface Mount | ||
Sub Type Inductor Switch Boost Controller | ||
Dimming Operation PWM | ||
Terminal Type QFN8 | ||
Input Voltage Type DC | ||
LED Voltage 37 V | ||
Driver Current 20 mA | ||
Series STLD40D | ||
Number of Outputs 1 | ||
Standards/Approvals RoHS | ||
Primary Type Boost Converter | ||
STLD40D is a boost converter that operates from 3.0 V to 5.5 V. It can provide an output voltage as high as 37 V and can drive up to 10 white LEDs in series. The converter is a PFM (pulse frequency modulation) inductor switch that can work in discontinuous (DCM) mode operation. A minimum OFF time of the embedded boost switch TSWis fixed internally and allows limiting the switching frequency. The output current capability is 20 mA with an output voltage of 37 V. The regulation is done by sensing the LED current through the resistor RLED. The device can be turned ON/OFF through the logic enable signal pin EN. By applying a low frequency PWM signal the LEDs can be dimmed. The maximum Peak inductor current can be programmed by connected a resistor RSETto the pin RSET.
Inductor switches boost controller
PFM mode control
High efficiency over wide range of input voltage from 3.0 V to 5.5 V
Over voltage protection with automatic restart
Adjustable Peak current limit
Enable pin with possibility of PWM dimming control
Low shutdown current < 1 μA
Small external component
Good load and line regulation
QFN8 3 x 3 mm
Applications
White LED supply for LCD backlight
Mobile phone
PDA and organizers
Any handsets powered form 3.0 V to 5.5 V