STMicroelectronics LED Driver ICLED Driver, -0.4/7 V 100 mA 16-Pin HTSSOP
- RS stock no.:
- 203-3414P
- Mfr. Part No.:
- LED8102SXTTR
- Manufacturer:
- STMicroelectronics
Image representative of range
Bulk discount available
Subtotal 50 units (supplied on a continuous strip)*
R 853,80
(exc. VAT)
R 981,85
(inc. VAT)
Stock information currently inaccessible - Please check back later
Units | Per unit |
|---|---|
| 50 - 90 | R 17.076 |
| 100 - 240 | R 16.564 |
| 250 - 990 | R 15.901 |
| 1000 + | R 15.265 |
*price indicative
- RS stock no.:
- 203-3414P
- Mfr. Part No.:
- LED8102SXTTR
- Manufacturer:
- STMicroelectronics
Specification
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | STMicroelectronics | |
| Product Type | LED Driver ICLED Driver | |
| Output Current | 100mA | |
| Input Voltage Type | DC | |
| Mount Type | Through Hole | |
| Package Type | HTSSOP | |
| Number of Pins | 16 | |
| Maximum Output Voltage | 7V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | RoHS | |
| Series | LED8102SXTTR | |
| Length | 3mm | |
| Height | 0.5mm | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand STMicroelectronics | ||
Product Type LED Driver ICLED Driver | ||
Output Current 100mA | ||
Input Voltage Type DC | ||
Mount Type Through Hole | ||
Package Type HTSSOP | ||
Number of Pins 16 | ||
Maximum Output Voltage 7V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals RoHS | ||
Series LED8102SXTTR | ||
Length 3mm | ||
Height 0.5mm | ||
Automotive Standard No | ||
The STMicroelectronics LED8102S is a monolithic, 8-channel LED driver with direct switch control. It is equipped with a thermal management that protects the device forcing it in shutdown (typically: power-off at 170 °C with 15 °C hysteresis to restart). LEDs brightness can be adjusted with a global PWM signal applied to the output enable pin (OE), on all active outputs. The outputs can be connected in parallel, or left unconnected if not used, as required by application. Thermal protection switches OFF only the output channels.
Programmable current through external resistor
Thermal shutdown
Available in high thermal efficiency TSSOP exposed pad package