- RS stock no.:
- 175-7755
- Mfr. Part No.:
- uCAM-III
- Manufacturer:
- 4D Systems
12 Available from UK/Europe in 4–6 working days for collection or delivery to major cities (Heavy, hazardous or lithium product excluded. Delivery T&C's apply)
Not Available for premium delivery
Added
Price (Excl VAT) Each
R 1 051,07
(exc. VAT)
R 1 208,73
(inc. VAT)
Units | Per unit |
1 + | R 1 051,07 |
- RS stock no.:
- 175-7755
- Mfr. Part No.:
- uCAM-III
- Manufacturer:
- 4D Systems
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- CN
Product Details
4D Systems serial camera module
The 4D Systems uCAM-III highly integrated serial camera module attachable to any host system that requires a video camera or a JPEG compressed still camera, and is the new upgrade to the popular uCAM-II that is backwards compatible but includes some additional features. The module uses a CMOS VGA colour sensor along with a JPEG compression chip that provides a low cost and low powered camera system. The uCAM-III come in a compact form factor with a built-in lens and a 5 wire connector that provides easy access to both power and serial data. The uCAM-III ship with the 56-degree lens installed. It is used in embedded devices.
Features and Benefits
5VDC nominal supply
Additions lenses available
Built-in colour conversion circuits for 16 bit CrYCbY, 8-bit grey, 16 bit RGB or standard JPEG images
Built-in down sampling, clamping and windowing circuits for VGA, QVGA or 160x120 image resolutions
Compact in dimensions 32mmx32mmx21mm (without lens, including header)
Locking nut for locking focus in place
No external DRAM required
On-board EEPROM provides a command-based interface to the external host via TTL serial link
On-board VGA colour sensor and RAW/JPEG CODEC for different resolutions
Small size, low cost and low powered camera module
UART: up to 3.68Mbps for transferring JPEG still pictures or raw images
Additions lenses available
Built-in colour conversion circuits for 16 bit CrYCbY, 8-bit grey, 16 bit RGB or standard JPEG images
Built-in down sampling, clamping and windowing circuits for VGA, QVGA or 160x120 image resolutions
Compact in dimensions 32mmx32mmx21mm (without lens, including header)
Locking nut for locking focus in place
No external DRAM required
On-board EEPROM provides a command-based interface to the external host via TTL serial link
On-board VGA colour sensor and RAW/JPEG CODEC for different resolutions
Small size, low cost and low powered camera module
UART: up to 3.68Mbps for transferring JPEG still pictures or raw images
Specification
Attribute | Value |
---|---|
Series | microCAM-III |
Frame Rate | 1fps |
Mounting Type | Through Hole |
Pin Count | 5 |
Dimensions | 32 x 32 x 15.6mm |
Length | 32mm |
Width | 32mm |
Height | 15.6mm |
Maximum Operating Supply Voltage | 9 V |
Maximum Operating Temperature | +85 °C |
Minimum Operating Supply Voltage | 4.5 V |
Minimum Operating Temperature | -30 °C |
- RS stock no.:
- 175-7755
- Mfr. Part No.:
- uCAM-III
- Manufacturer:
- 4D Systems