Nexperia 74HC574D,653 8 Flip Flop IC 74HC, 3 State, 20-Pin SO
- RS stock no.:
- 170-7983
- Mfr. Part No.:
- 74HC574D,653
- Manufacturer:
- Nexperia
Bulk discount available
Subtotal (1 reel of 2000 units)*
R 9 502,00
(exc. VAT)
R 10 928,00
(inc. VAT)
Stock information currently inaccessible - Please check back later
Units | Per unit | Per Reel* |
|---|---|---|
| 2000 - 2000 | R 4.751 | R 9,502.00 |
| 4000 - 8000 | R 4.632 | R 9,264.00 |
| 10000 - 18000 | R 4.493 | R 8,986.00 |
| 20000 + | R 4.313 | R 8,626.00 |
*price indicative
- RS stock no.:
- 170-7983
- Mfr. Part No.:
- 74HC574D,653
- Manufacturer:
- Nexperia
Specification
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Nexperia | |
| Logic Family | 74HC | |
| Product Type | Flip Flop IC | |
| Input Type | CMOS | |
| Output Type | 3 State | |
| Clock Frequency | 24MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Package Type | SO | |
| Minimum Supply Voltage | 2V | |
| Pin Count | 20 | |
| Maximum Supply Voltage | 6V | |
| Flip-Flop Type | D Flip-Flop | |
| Trigger Type | Positive Edge | |
| Minimum Operating Temperature | -40°C | |
| Maximum Propagation Delay Time @ CL | 38ns | |
| Number of Elements per Chip | 8 | |
| Maximum Operating Temperature | 125°C | |
| Length | 13mm | |
| Height | 2.45mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Nexperia | ||
Logic Family 74HC | ||
Product Type Flip Flop IC | ||
Input Type CMOS | ||
Output Type 3 State | ||
Clock Frequency 24MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Package Type SO | ||
Minimum Supply Voltage 2V | ||
Pin Count 20 | ||
Maximum Supply Voltage 6V | ||
Flip-Flop Type D Flip-Flop | ||
Trigger Type Positive Edge | ||
Minimum Operating Temperature -40°C | ||
Maximum Propagation Delay Time @ CL 38ns | ||
Number of Elements per Chip 8 | ||
Maximum Operating Temperature 125°C | ||
Length 13mm | ||
Height 2.45mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
Related links
- Toshiba 8 Flip Flop IC 74HC 20-Pin SOIC
- Toshiba 74HC574D 8 Flip Flop IC 74HC 20-Pin SOIC
- Nexperia 1 Flip Flop IC 74HC 20-Pin TSSOP
- Nexperia 74HC574PW 3 State, 20-Pin TSSOP
- Nexperia 74HCT574D 3 State, 20-Pin SO
- Nexperia 74HC574D 3-State, 20-Pin SOIC
- Nexperia 74HCT273D D Type, 20-Pin SO
- Nexperia 74HC74D D Type, 14-Pin SO