48mm x 66m ESD Safe Tape

This RS PRO marking tape lets you provide a clear warning that people are entering an ESD (electrostatic discharge) controlled area. Found in commercial and industrial settings, it's used in server rooms and labs. It's suitable for marking out the floor area of EPA, as well as fastening to walls.

You'll find 66 metres of ESD tape inside this pack. It's coated with a transparent PVC for added protection during use. It has an attention-grabbing black and yellow design, with the ESD logo and bold text.

You should carefully check that the contact surfaces are totally dry and clean from oil, grease and dust before use. This product should be stored in a dry environment, with a temperature between +18°C and +30°C. It should be kept away from dust, humidity and direct sun exposure.

• ESD controlled area warning tape
• Length of 66 m
• Black and yellow tape
• Coated with a transparent PVC film
• Film thickness of 32 μm (micrometre) (± 10%)
• Carrier thickness of 75 μm (± 5%)
• Adhesive weight of 18 g/m² (± 5%)
• Total thickness of 93 μm (± 5%)
• Tensile strength of 160 N/mm² (± 30)
• Elongation at break of 75% (± 30%)
• Solvent-based adhesive with natural rubber
• Peel adhesion of 4 N/25mm (± 1)
• Shear adhesion of >

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards