Name: Digilent 410-299 Programming Cable for use with Xilinx Tool, JTAG-HS3
Brand: Digilent
SKU: 134-6435
Price: 1310.60 ZAR
Availability: InStock

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Digilent
	Product Type	Development Kit Accessory
	Accessory Type	Programming Cable
	For Use With	Xilinx Tool, JTAG-HS3
	Standards/Approvals	No

JTAG-HS3 FPGA Programming Cable

The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC.

Features

• Separate Vref drives JTAG signal voltages

• Vref can be any voltage between +1.8V and +5V

• USB 2.0 HS port drives JTAG bus at up to 30Mbit/sec

• Compatible with Xilinx ISE 14.1 and newer

• Compatible with Xilinx Vivado 2013.3 and newer

• PC connector: MicroUSB

• JTAG connector: 2 x 7-pin 2mm

• Open-drain buffer on pin 14 allows processor reset of Xilinx Zynq platform

Supported Target Devices

• Xilinx FPGAs;• Xilinx Zynq-7000;• Xilinx CoolRunner™/CoolRunner-II CPLDs;• Xilinx Platform Flash ISP configuration PROMs;• Selected third-party SPI PROMs;• Selected third-party BPI PROMs

Target Devices Not Supported

• Xilinx 9500/9500XL CPLDs;• Xilinx 1700 and 18V00 ISP configuration PROMs;• Xilinx FPGA eFUSE programming

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Note

This cable is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.

Supplied with

USB cable

Digilent 410-299 Programming Cable for use with Xilinx Tool, JTAG-HS3

FREE delivery for orders over R 1,500.00