Recom RPX-2.5 DC/DC Converter, 1.2V dc, 6 V dc/ 2.5 A, 12V dc Input, 4.5V, Surface, 85 °C Max Temp -40 °C Min Temp, QFN
- RS stock no.:
- 193-6474
- Distrelec Article No.:
- 301-65-011
- Mfr. Part No.:
- RPX-2.5-CT
- Manufacturer:
- Recom
Image representative of range
Bulk discount available
Subtotal (1 unit)*
R 116,59
(exc. VAT)
R 134,08
(inc. VAT)
Stock information currently inaccessible - Please check back later
Units | Per unit |
|---|---|
| 1 - 4 | R 116.59 |
| 5 - 9 | R 113.68 |
| 10 - 24 | R 110.27 |
| 25 - 49 | R 105.86 |
| 50 + | R 101.63 |
*price indicative
- RS stock no.:
- 193-6474
- Distrelec Article No.:
- 301-65-011
- Mfr. Part No.:
- RPX-2.5-CT
- Manufacturer:
- Recom
Specification
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Recom | |
| Product Type | DC/DC Converter | |
| Output Voltage 1 | 1.2, 6V dc | |
| Minimum Input Voltage | 4.5V | |
| Maximum Input Voltage | 12V dc | |
| Mount Type | Surface | |
| Number of Outputs | 1 | |
| MTBF | 400000000h | |
| Output Voltage Adjustment Range | 1. 2 to 6 V dc | |
| Ripple and Noise | 22mV Pk-Pk | |
| Output Current 1 | 2.5A | |
| Package Type | QFN | |
| Series | RPX-2.5 | |
| Length | 4.1mm | |
| Width | 4.6mm | |
| Weight | 107mg | |
| Standards/Approvals | REACH | |
| Depth | 2.1mm | |
| Maximum Operating Temperature | 85°C | |
| Minimum Operating Temperature | -40°C | |
| Efficiency | 0.91% | |
| Select all | ||
|---|---|---|
Brand Recom | ||
Product Type DC/DC Converter | ||
Output Voltage 1 1.2, 6V dc | ||
Minimum Input Voltage 4.5V | ||
Maximum Input Voltage 12V dc | ||
Mount Type Surface | ||
Number of Outputs 1 | ||
MTBF 400000000h | ||
Output Voltage Adjustment Range 1. 2 to 6 V dc | ||
Ripple and Noise 22mV Pk-Pk | ||
Output Current 1 2.5A | ||
Package Type QFN | ||
Series RPX-2.5 | ||
Length 4.1mm | ||
Width 4.6mm | ||
Weight 107mg | ||
Standards/Approvals REACH | ||
Depth 2.1mm | ||
Maximum Operating Temperature 85°C | ||
Minimum Operating Temperature -40°C | ||
Efficiency 0.91% | ||
- COO (Country of Origin):
- CN
The RPX-2.5 is a buck converter with integrated inductor in a tiny 4.5mm x 4mm x 2mm thermally enhanced QFN package (the smallest in its class). The input range is from 4.5 to 28VDC, allowing 5V, 12V or 24V supply voltages to be used. The output voltage can be set with two resistors in the range from 1.2V up to 6V. The output current is up to 2.5A and is fully protected against continuous short-circuits, output overcurrent or over-temperature faults. The enable pin features an internal pull-up current source, so will operate with open-drain, open-collector, logic gate or switched inputs (leave open if not used).
Buck regulator power module with integrated shielded inductor
28V maximum input voltage
2.5A maximum output current
SCP, OCP, OTP, OVP and UVLO protection
4.5mm x 4mm low profile QFN package
Flip-Chip technology for improved thermal management
Efficiency up to 91%
Related links
- Recom RPX DC-DC Converter 4 → 36 V dc Input Surface Mount, +125°C Max
- Recom RPX DC-DC Converter 4 → 36 Input Surface Mount, +125°C Max Temp
- Recom 1-Channel 500μA 17-Pin, QFN Package
- Recom 1-Channel 1.5mA 17-Pin, QFN Package
- Recom for RPX-2.5 Buck Regulator Module
- Recom R05CT DC-DC Converter 4.5 → 5.5 V dc Input Surface Mount, +150°C Max Temp -40°C Min
- Recom RP DC-DC Converter 4.5 → 5.5 V dc Input Through Hole, +80°C Max Temp -40°C Min
- Recom R05P DC-DC Converter 4.5 → 5.5 V dc Input Through Hole, +90°C Max Temp -40°C