Recom RM DC-DC Converter, 5V dc/ 50mA Output, 2.97 → 3.63 V dc Input, 0.25W, Through Hole, +85°C Max Temp -40°C

Unregulated outputs
1kVdc isolation
Efficiency at full load up to 72%
Short circuit protection
Fully encapsulated
UL94V-0 package material
Industry standard SIP4 pinout

MTBF to MIL-HDBK 217F.
Operating temperature is without derating.

EN-60950-1

Convert one DC to another using this converter from RECOM. It supplies a current of 50mA for energy efficiency in your system and a 0.25W power rating for robust support to low-powered connections. The pin has a bent angle of 90°, so it fits neatly in setups where space is limited. A wide range of switching frequencies of 280kHz to 380kHz checks the rate at which your device is turned off and on, so you're assured of a faster load response time and lower output ripple.

• Standard SIP package for easy compatibility
• Dimensions of 11.5 (L) x 10 (D) for space efficiency
• Plastic casing resists corrosion and heat to deliver an extended service life

• Instrumentation and test equipment
• Laptops and computers
• Mobile phones

The isolation voltage of a DC converter is the maximum voltage that can be supplied across the device for one second without affecting its isolation. This unit has an isolation voltage of 1kV DC to prevent damage by ensuring that no direct current flows from one circuit to the other.