Schneider Electric TeSys D LC1D Contactor, 24 V dc Coil, 3-Pole, 9 A, 4 kW, 3NO, 690 V ac

This contactor from Schneider Electric ticks all the boxes for the protection and power control of motor starters. It reliably switches an electrical circuit on or off and also safeguards equipment against damage caused by rogue power surges. The unit's a handy all-rounder that comes with reinforcement, as its two built-in auxiliary contact blocks offer backup support and enhanced monitoring capabilities. You can use it to make or break motor load currents up to 150A and resistive loads up to 200A, so it's your go-to for industrial and commercial power control applications.

• Comes with an IP20-rated front cover that's touch-proof and protected against objects larger than 12mm
• Optional rail or plate mounting, to best suit your installation needs
• Mechanical durability of up to 30 million cycles, for reliability throughout its extended service life
• Wide operating temperature range between -40°C and +60°C, making it suitable to use in extreme settings

• Lighting rigs
• Automotive manufacturing
• Robotics systems
• Food and beverage industries

This contactor weighs in at just 0.48kg, so it puts minimal strain on your control board.

CSA C22.2 No 14, EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508, IEC 60335-1.

LROS (Lloyds register of shipping), CSA, UL, GOST, DNV, CCC, GL, BV, RINA, UKCA.