Recently searched

    Fluke 772 DC Current Clamp Meter, 100mA dc

    RS stock no.:
    669-3490
    Mfr. Part No.:
    Fluke 772
    Manufacturer:
    Fluke
    Fluke

    Image representative of range

    View all Clamp Meters
    17 Available from UK/Europe in 4–6 working days for collection or delivery to major cities (Heavy, hazardous or lithium product excluded. Delivery T&C's apply)
    Add to Basket
    units

    Not Available for premium delivery

    Added

    Price (Excl VAT) Each

    R 25,290.00

    (exc. VAT)

    R 29,083.50

    (inc. VAT)

    unitsPer unit
    1 +R 25,290.00
    RS stock no.:
    669-3490
    Mfr. Part No.:
    Fluke 772
    Manufacturer:
    Fluke

    Not Applicable

    COO (Country of Origin):
    CN

    Legislation and Compliance

    Not Applicable

    COO (Country of Origin):
    CN

    Product Details

    772 & 773 Milliamp Process Clamp Meters


    Need more hours in your day? Save time by not breaking the loop on 4-20 mA signal measurements with the Fluke 771 Process Clamp Meter.


    Are you spending time:


    •Taking mA measurements by removing a wire and breaking the loop
    •Calling the control room to isolate a loop

    •Testing analog input/output on a console

    •Troubleshooting devices with mA inputs and outputs

    •Repairing intermittent or erratic 4-20 mA loops

    •Going back to the shop to get extra tools


    If you need more time in your busy day take a good look at the Fluke 772 and 773 mA Clamp Meters. Designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.


    Here are some specific ways the Fluke 772 and 773 clamp meters will help you:


    Measure mA signals for PLC and control system analog I/O without breaking the loop
    •Measures low level dc current
    •Correlate process indication with real physical value

    Measure output signals from transmitters without breaking the loop
    •Maintain and troubleshoot process and automation equipment without breaking the loop
    •No disruption to the process

    Detachable clamp with extension cable
    •Measurements in tight locations
    •Enables measurements in difficult situations

    Measurement Spotlight
    •Illuminates hard to see wires in dark enclosures
    •Measurement process is easier and quicker

    Measure up to 99.9 mA range non-contact
    •Wide range of measurements
    •Measures 10 to 50 mA signals in older control systems

    Automatic power off
    •After 15 minutes and 2 minute automatic off for backlight and spotlight
    •Saves battery life

    Want simultaneous mA source/measure? Consider the Fluke 773 Milliamp Clamp Meter.


    Features and Benefits


    •Best in class 0.2% accuracy
    •0.01 mA resolution and sensitivity
    •Measure 4 to 20 mA signals without “breaking the loop”
    •Measure mA signals for PLC and control system analog I/O
    •Dual backlit display with both mA measurement and percent of 4 to 20 mA span
    •Measurement Spotlight illuminates hard to see wires in dark enclosures
    •Detachable clamp with extension cable for measurements in tight locations
    •Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
    •Automatically change the 4 to 20 mA output for remote testing
    •Power saving features, auto-off, backlight timeout extend battery life
    •Hold function captures and displays changing measurements
    •Measure 4 to 20 mA signals with in-circuit measurement
    •Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
    •Source 4 to 20 mA signals for testing control system I/O or I/Ps
    •mA output linear ramp or 25% step output
    •Automatically change the 4 to 20 mA output for remote testing


    Fluke 772 additional features:


    Source 4 to 20 mA signals for testing control system I/O or I/Ps
    Simulate 4 to 20 mA signals for testing control system I/O

    Measure 4 to 20 mA signals with in-circuit measurement

    Simultaneously measure mA in-circuit with 24 V loop power for powering and testing transmitters

    Source mA output signals in a linear ramp or 25 % step output for remote testing

    Power saving features, auto-off, backlight timeout extend battery life


    Fluke 773 additional features:


    DC voltage measurement to verify 24 V power supplies or voltage I/O signals
    Source dc voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal
    Scaled mA output corresponds to the 4 to 20 mA signal measured by the mA clamp enables a logging DMM or other device to record the 4 to 20 mA signal without breaking the loop mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
    Voltage output linear ramp or 25 % step output
    Automatically change the voltage output for remote testing


    Note

    For details of the 771 process clamp meter see stock no. 287-642

    Supplied with

    4 AA alkaline batteries, test lead set with integral prods and 2 crocodile clips; test leads with integral grabber clips; soft carry case & instructions

    Fluke Clamp Meter


    The Fluke milliamp process clamp meter measures current up to 99.9mA DC. It saves time and money by measuring 4mA to 20mA signals five times faster than with traditional DMMs, and without breaking the loop. It can detach the clamp section of the meter and use it as a remote jaw, connected to the main body by an extension cable to make it easier to take measurements in tight spaces.
    Note:
    For details of the 771 process clamp meter see stock no. 287-642
    Supplied with:
    4 AA alkaline batteries, test lead set with integral prods and 2 crocodile clips

    test leads with integral grabber clips

    soft carry case & instructions


    Features and Benefits


    Sources 4mA to 20mA signals for testing control system I/O or I/Ps
    Simulates 4mA to 20 mA signals for testing control system I/O
    Measures 4mA to 20mA signals with in-circuit measurement
    Simultaneously measures mA in-circuit with 24V loop power for powering and testing transmitters
    Source output signals in a linear ramp or 25% step output- Automatically change the 4mA to 20 mA output for remote testing
    Power-saving features, auto-off, backlight timeout extend battery life
    The scaled output provides a continuous mA signal that corresponds to the 4mA to 20mA signal measured by the mA clamp- Output mA signal enables a logging DMM or other device to record the 4mA to 20mA signal without breaking the loop
    mA in/out- Simultaneously measures the mA signal with the clamp and source an mA signal- apply an mA input signal to a device and measure its 4mA to 20mA output on devices such as valves or mA isolators
    Voltage output linear ramp or 25% step output Automatically change the voltage output for remote testing
    Delivers 0.01mA resolution and sensitivity
    Measurement Spotlight to illuminate hard to see wires in dark enclosure
    Operating temperature ranges between -10°C and 50°C


    Applications


    Petrochemicals
    Oil and gas
    Food and beverages
    Pharmaceuticals


    Certifications


    IP40 rated



    Specification

    AttributeValue
    Absolute Maximum DC Current Measurement100mA dc
    Model Number772
    DC Current Measurement Resolution10uA
    Best DC Current Accuracy±(0.2% rdg + 5dgts)
    Clamp Meter TypeDC Current Clamp Meter
    Functions MeasuredDC Current
    Minimum Operating Temperature-10°C
    Height41mm
    Maximum Conductor Size4.5mm
    Battery Life20 h
    Weight420g
    Jaw Capacity Busbars4.5mm
    Dimensions248 x 76 x 41mm
    Length248mm
    Width76mm
    Power SourceBattery
    Maximum Operating Temperature+50°C
    Display TypeLCD
    Battery TypeAA
    17 Available from UK/Europe in 4–6 working days for collection or delivery to major cities (Heavy, hazardous or lithium product excluded. Delivery T&C's apply)
    Add to Basket
    units

    Not Available for premium delivery

    Added

    Price (Excl VAT) Each

    R 25,290.00

    (exc. VAT)

    R 29,083.50

    (inc. VAT)

    unitsPer unit
    1 +R 25,290.00