Microchip, CAN Transceiver 1 Mbps, 8-Pin PDIP
- RS stock no.:
- 177-1626
- Mfr. Part No.:
- MCP2551-E/P
- Manufacturer:
- Microchip
Image representative of range
Subtotal (1 tube of 60 units)*
R 1 695,36
(exc. VAT)
R 1 949,64
(inc. VAT)
Stock information currently inaccessible - Please check back later
Units | Per unit | Per Tube* |
|---|---|---|
| 60 + | R 28.256 | R 1,695.36 |
*price indicative
- RS stock no.:
- 177-1626
- Mfr. Part No.:
- MCP2551-E/P
- Manufacturer:
- Microchip
Specification
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Microchip | |
| Product Type | CAN Transceiver | |
| Maximum Data Rate | 1Mbps | |
| Number of Transceivers | 1 | |
| Sub Type | CAN Transceiver | |
| Power Down Mode | High Speed, Standby, Slope Control | |
| Supply Current | 75mA | |
| Mount Type | Through Hole | |
| Interface Type | ISO 11898 | |
| Package Type | PDIP | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| ESD Protection | Yes | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | No | |
| Series | MCP2551 | |
| Height | 4.83mm | |
| Length | 10.16mm | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand Microchip | ||
Product Type CAN Transceiver | ||
Maximum Data Rate 1Mbps | ||
Number of Transceivers 1 | ||
Sub Type CAN Transceiver | ||
Power Down Mode High Speed, Standby, Slope Control | ||
Supply Current 75mA | ||
Mount Type Through Hole | ||
Interface Type ISO 11898 | ||
Package Type PDIP | ||
Pin Count 8 | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
ESD Protection Yes | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals No | ||
Series MCP2551 | ||
Height 4.83mm | ||
Length 10.16mm | ||
Automotive Standard No | ||
- COO (Country of Origin):
- US
The MCP2551 is a high-speed CAN transceiver, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2551 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ISO-11898 standard, including 24V requirements. It will operate at speeds of up to 1 Mb/s.
Slope control input
Supports 1 Mb/s operation
Suitable for 12V and 24V systems
Externally-controlled slope for reduced RFIemissions
Permanent dominant detect
Low current standby operation
High noise immunity due to differential busimplementation