Mitutoyo 300mm, 12in Digital Caliper Caliper 0.01 mm Resolution, Imperial, Metric

The Mitutoyo 0 to 12in digital precision calliper is a highly accurate measuring instrument. It is enabled with a new age electromagnetic inductive sensor that repels dirt, oil, and water ensuring maximum accuracy. It has a function that starts the absolute-mode measurement without any zero-setting after it is switched on. The INC (incremental) measurement function enables the display value to be set to zero, temporarily, at the current slider position to enable easy incremental-mode measurement. The original position of the calliper can be set or reset with the ’origin' switch at any time.
Note:
Imperial/metric versions have thumbwheel where metric does not.
SPC output versions -A connection port continually transmits data (MITUTOYO FORMAT). 1m/2m leads are available separately, see this section
Supplied with SR44 Battery

The slider configuration features an ergonomic, thumb-friendly shape
Battery life of approximately 3.5 years has been achieved under normal use through the adoption of Mitutoyo's absolute scale
Resolution of 0.01mm
Accuracy of ±0.02mm
High response speed
ON/OFF -Switches unit on, display indicates distance of jaws from pre-set origin point
ABS -Absolute feature re-sets the ’reference’ point of measurement of the instrument jaws

Mechanical engineering
Aerospace industries
Steel and other metalwork industry