Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	SKF
	Product Type	Take Up Bearing
	Inside Diameter	30mm
	Outside Diameter	114mm
	Material	Cast Iron
	Static Load Rating	11.2kN
	Dynamic Load Rating	19.5kN
	Locking Type	Set Screw
	Overall Width	38.1mm
	Bore Type	Cylindrical
	Standards/Approvals	No
	Limiting Speed	5000rpm

	Select all
	Brand SKF
	Product Type Take Up Bearing
	Inside Diameter 30mm
	Outside Diameter 114mm
	Material Cast Iron
	Static Load Rating 11.2kN
	Dynamic Load Rating 19.5kN
	Locking Type Set Screw
	Overall Width 38.1mm
	Bore Type Cylindrical
	Standards/Approvals No
	Limiting Speed 5000rpm

Datasheet - Y/UCT 206/H

COO (Country of Origin):: IT

SKF Take Up Bearing, 114mm Outside Diameter, 30mm Inside Diameter - UCT 206/H

This take-up bearing is a cast iron support component designed to accommodate rotational shafts within industrial tensioning and conveying assemblies. It provides a locating and load-bearing function for shafts running at elevated speeds, where a cylindrical bore and set-screw locking method enable straightforward shaft retention and alignment in machinery environments.

Features and Benefits:

• Set-screw locking secures shaft position during continuous operation
• Cylindrical bore offers straightforward mounting on round shafts
• 11.2 kN static rating resists sustained radial loads under standstill
• 19.5 kN dynamic rating supports fluctuating operational loads
• 5,000 r/min limiting speed accommodates high-speed rotating shafts

Applications

• Suitable for conveyor tensioning rollers in manufacturing lines
• Used with idler shafts in material handling equipment
• Ideal for shaft support in rotary tension assembly units
• Can be used for pulleys in high-speed drive systems

What material is used for the housing to withstand industrial stresses?

The housing is MADE from cast iron, chosen for structural rigidity and wear resistance.

How is the bearing secured to the shaft to prevent axial movement?

A set-screw locking arrangement is used to clamp the inner surface to the shaft.

What bore form should the mating shaft possess for correct fit?

The shaft must be cylindrical to match the bearing’s cylindrical bore.

What operating speed limits must be observed during selection?

The bearing is rated for operation up to 5,000 r/min.

How does the bearing perform under dynamic load conditions?

It is specified with a 19.5 kN dynamic load capacity to accommodate variable operational forces.

SKF Take Up Bearing 30 mm ID 114 mm OD UCT 206/H

FREE delivery for orders over R 1,500.00