Linear Motion

We offer a great range of linear slides, linear guides & positioning tables for any power transmission requirement. We work closely with industry-leading brands like igus, Bosch Rexroth, THK, IKO Nippon Thmpson and NSK so you have an expert selection of cylinder guides, slide assemblies, guide wheels and slewing rings. You can also choose from a full range of accessories including socket tools, T-Nuts and combination plates.

What is power transmission?

Power transmission, or specifically mechanical power transmission in this case, are the components used in an industrial system with moving parts, as opposed to those that are powered by electricity.

What types of mechanical power transmission options are available?

The following types are available:

  • Cylinder Guides: pneumatic devices for generating motion in various ways
  • Linear Guides
  • Assemblies: a load bearing mechanism that also guides the load in a straight line
  • Guide blocks: the carriage that slides along the assembly
  • Rails: the beam along which carriage slides along
  • Linear Slides
  • Assemblies: for precise linear rolling motion along guideways
  • Cap wipers: these lubricate contact surfaces, remove debris and improve operational safety
  • Carriage plates: a flush surface for mounting your components and for attaching t-nuts with grooves for drifting
  • Flange clamps: these enable slides to become self-supporting beams
  • Guide wheels: ball bearing based wheels allowing precision linear motion
  • Slewing rings: these are slow turning rotating rings containing bearings
  • Rails: allow for powered or manual mechanism motion in a linear direction
  • T-Nuts: these secure fixings for your components
  • Track Rollers: these are concentric and eccentric adjusting roller wheels for a spacer slide
  • Adapter Bushings: are used for mounting guide wheels, in concentric and eccentric varieties
  • Positioning Cables
  • Clamping strips: used for attaching existing and additional equipment
  • Combination plates: are securing attachments which can be drilled
  • Angles: for 45° and 90° angular component clamping
Flat Cage Assemblies
Flat Cage Assemblies
Guide Wheels
Guide Wheels
Linear Bearing Units
Linear Bearing Units
Linear Bearings
Linear Bearings
Linear Guide Blocks
Linear Guide Blocks
Linear Guide Rails
Linear Guide Rails
Linear Guides
Linear Guides
Linear Shaft Supports
Linear Shaft Supports
Linear Shafts
Linear Shafts
Linear Slide Accessories
Linear Slide Accessories
Linear Slide Rails
Linear Slide Rails
Linear Slides
Linear Slides
Positioning Tables
Positioning Tables
Slewing Rings
Slewing Rings

2105 Products showing for Linear Motion

1 of 106
In Stock
RS PRO Guide Block HGW Series, 34.9 kN Dynamic Load
  • RS stock no. 360-836
Subtotal (1 unit)
R 2 869,04(exc. VAT)
In Stock
RS PRO Guide Block MGN Series, 1860 N Dynamic Load
  • RS stock no. 176-6665
Subtotal (1 unit)
R 1 564,86(exc. VAT)
In Stock
RS PRO Guide Block RGW Series, 27.7 kN Dynamic Load
  • RS stock no. 360-867
Subtotal (1 unit)
R 3 449,66(exc. VAT)
In Stock
RS PRO Guide Block HG Series, 26480 N Dynamic Load
  • RS stock no. 176-6695
Subtotal (1 unit)
R 3 104,64(exc. VAT)
In Stock
Rose+Krieger Positioning Table FNA8036TA0194, 215 N
  • RS stock no. 373-7799
  • Mfr. Part No. FNA8036TA0194
Subtotal (1 unit)
R 8 631,99(exc. VAT)
In Stock
RS PRO Guide Block HGW Series, 42.2 kN Dynamic Load
  • RS stock no. 360-839
Subtotal (1 unit)
R 3 791,61(exc. VAT)
In Stock
NSK Linear Guide LH100120ANK1B01PN1, LH
  • RS stock no. 497-9411
  • Mfr. Part No. LH100120ANK1B01PN1
Subtotal (1 unit)
R 2 205,66(exc. VAT)
Currently unavailable
HepcoMotion W1X Guide Wheel with 19.55 mm OD
  • RS stock no. 259-0094
  • Mfr. Part No. W1X
Subtotal (1 unit)
R 729,48(exc. VAT)
In Stock
Ewellix Makers in Motion Linear Guide Carriage LLTHZ 20 S6 LLTHZ S6 Series
  • RS stock no. 184-9760
  • Mfr. Part No. LLTHZ 20 S6
Subtotal (1 unit)
R 310,18(exc. VAT)
In Stock
Igus Linear Guide Carriage NW-02-17 DryLin N Series, 25 N Dynamic Load
  • RS stock no. 448-5405
  • Mfr. Part No. NW-02-17
Subtotal (1 unit)
R 88,45(exc. VAT)
In Stock
THK Linear Guide Carriage SRS15MUU(GK) SRS Series, 6.66 kN Dynamic Load
  • RS stock no. 217-5242
  • Mfr. Part No. SRS15MUU(GK)
Subtotal (1 unit)
R 1 475,87(exc. VAT)
In Stock
IKO Nippon Thompson Guide Block ML20C1HS2 ML Series, 6.65 kN Dynamic Load
  • RS stock no. 199-9786
  • Mfr. Part No. ML20C1HS2
Subtotal (1 unit)
R 1 287,96(exc. VAT)
Stocked by manufacturer
THK SR15 Series, SR15-580L(GK), Linear Guide Rail 15 mm width 580 mm Length
  • RS stock no. 619-955
  • Mfr. Part No. SR15-580L(GK)
Subtotal (1 unit)
R 2 478,71(exc. VAT)
In Stock
THK Linear Guide Carriage SR15W1SS(GK) SR Series, 9.51 kN Dynamic Load
  • RS stock no. 729-9989
  • Mfr. Part No. SR15W1SS(GK)
Subtotal (1 unit)
R 2 299,22(exc. VAT)
In Stock
RS PRO Guide Block HGW Series, 14.7 kN Dynamic Load
  • RS stock no. 360-821
Subtotal (1 unit)
R 1 966,99(exc. VAT)
In Stock
IKO Nippon Thompson Linear Guide Carriage ML5C1HS2 ML Series, 676 N Dynamic Load
  • RS stock no. 917-5951
  • Mfr. Part No. ML5C1HS2
Subtotal (1 unit)
R 1 612,14(exc. VAT)
In Stock
IKO Nippon Thompson, BWU2545 Stainless Steel Linear Slides, 28 mm Stroke Length
  • RS stock no. 238-3436
  • Mfr. Part No. BWU2545
Subtotal (1 unit)
R 3 322,58(exc. VAT)
In Stock
Ewellix Makers in Motion Linear Shaft Support Bearing Housing 53 mm, LSCS 25 80 mm 28 mm
  • RS stock no. 285-0289
  • Mfr. Part No. LSCS 25
Subtotal (1 unit)
R 1 444,88(exc. VAT)
In Stock
Igus Positioning Table SHT-12-AWM-250, 2.8 kN
  • RS stock no. 488-6016
  • Mfr. Part No. SHT-12-AWM-250
Subtotal (1 unit)
R 7 960,93(exc. VAT)
In Stock
ABB 109 mm Long Supported Shaft, 6 mm Shaft Diam.
  • RS stock no. 289-1575
  • Mfr. Part No. 1SCA101652R1001
Subtotal (1 unit)
R 44,91(exc. VAT)
1
2
3
106
Results per page

Related links