Dormer

Dormer Pramet

2864 Products showing for Dormer Pramet

Sort by
1 of 144
Stocked by manufacturer
Dormer Slot Drill, 3.5 mm Cutter, Carbide, 6mm Shank, 7 mm Cut Length
  • RS stock no. 728-763
  • Mfr. Part No. S813HB3.5
Subtotal (1 unit)
R 664,36(exc. VAT)
R 664,36/unit
In Stock
Dormer End Mill, 3 mm Cutter, Solid Carbide, 3mm Shank, 12 mm Cut Length
  • RS stock no. 637-552
  • Mfr. Part No. S9333.0
Subtotal (1 unit)
R 211,79(exc. VAT)
R 211,79/unit
In Stock
Dormer End Mill, 12 mm Cutter, Solid Carbide, 12mm Shank, 25 mm Cut Length
  • RS stock no. 666-6729
  • Mfr. Part No. S90412.0
Subtotal (1 unit)
R 1 137,71(exc. VAT)
R 1 137,71/unit
In Stock
Dormer Threading Tap, M5 Thread, Metric Fine Standard, Hand Tap
  • RS stock no. 273-0221
  • Mfr. Part No. E513M5X.5NO2
Subtotal (1 unit)
R 329,47(exc. VAT)
R 329,47/unit
In Stock
Dormer High Speed Steel Tin, 109mm Overall 1
  • RS stock no. 813-0036
  • Mfr. Part No. A002S6.8
Subtotal (1 unit)
R 143,25(exc. VAT)
R 143,25/unit
In Stock
Dormer Threading Tap, M12 Thread, Metric Fine Standard, Hand Tap
  • RS stock no. 273-0186
  • Mfr. Part No. E513M12X1.5NO2
Subtotal (1 unit)
R 611,79(exc. VAT)
R 611,79/unit
In Stock
Dormer Threading Tap, M6 Thread, Metric Fine Standard, Hand Tap
  • RS stock no. 273-0223
  • Mfr. Part No. E513M6X.75NO1
Subtotal (1 unit)
R 326,69(exc. VAT)
R 326,69/unit
In Stock
Dormer Threading Tap, M8 Thread, Metric Fine Standard, Hand Tap
  • RS stock no. 273-0230
  • Mfr. Part No. E513M8X1.0NO2
Subtotal (1 unit)
R 379,94(exc. VAT)
R 379,94/unit
In Stock
Dormer End Mill, 5 mm Cutter, Solid Carbide, 5mm Shank, 16 mm Cut Length
  • RS stock no. 637-490
  • Mfr. Part No. S9445.0
Subtotal (1 unit)
R 236,96(exc. VAT)
R 236,96/unit
In Stock
Dormer End Mill, 16 mm Cutter, Solid Carbide, 16mm Shank, 32 mm Cut Length
  • RS stock no. 666-6726
  • Mfr. Part No. S90416.0
Subtotal (1 unit)
R 1 884,73(exc. VAT)
R 1 884,73/unit
Stocked by manufacturer
Dormer Slot Drill, 5 mm Cutter, Carbide, 6mm Shank, 6 mm Cut Length
  • RS stock no. 729-564
  • Mfr. Part No. S802HA5.0
Subtotal (1 unit)
R 608,56(exc. VAT)
R 608,56/unit
In Stock
Dormer Threading Tap, M14 Thread, Metric Fine Standard, Hand Tap
  • RS stock no. 273-0192
  • Mfr. Part No. E513M14X1.5NO1
Subtotal (1 unit)
R 804,32(exc. VAT)
R 804,32/unit
In Stock
Dormer HSS, 86mm Overall 5 mm 1
  • RS stock no. 268-6446
  • Mfr. Part No. A1005.0
Subtotal (1 pack of 10 units)
R 643,78(exc. VAT)
R 64,378/unit
In Stock
Dormer Threading Tap, M10 Thread, Metric Fine Standard, Hand Tap
  • RS stock no. 273-0183
  • Mfr. Part No. E513M10X1.25NO6
Subtotal (1 unit)
R 1 342,32(exc. VAT)
R 1 342,32/unit
Stocked by manufacturer
Dormer Threading Tap, UNC 0.25 inch - 20 TPI Thread, UNC Standard, Hand Tap
  • RS stock no. 625-504
  • Mfr. Part No. E559UNC1/4NO1
Subtotal (1 unit)
R 116,79(exc. VAT)
R 116,79/unit
Stocked by manufacturer
Dormer End Mill, 16 mm Cutter, Carbide, 16mm Shank, 32 mm Cut Length
  • RS stock no. 729-330
  • Mfr. Part No. S765HB16.0
Subtotal (1 unit)
R 4 240,54(exc. VAT)
R 4 240,54/unit
In Stock
Dormer P880 Series Burr Set Carbide
  • RS stock no. 268-6590
  • Mfr. Part No. P88006
Subtotal (1 unit)
R 2 983,77(exc. VAT)
R 2 983,77/unit
In Stock
Dormer High Speed Steel Tin, 117mm Overall 1
  • RS stock no. 813-0058
  • Mfr. Part No. A002S8.5
Subtotal (1 unit)
R 203,36(exc. VAT)
R 203,36/unit
In Stock
Dormer End Mill, 8 mm Cutter, HSS, 10mm Shank, 19 mm Cut Length
  • RS stock no. 728-7989
  • Mfr. Part No. C2478.0
Subtotal (1 unit)
R 1 214,00(exc. VAT)
R 1 214,00/unit
In Stock
Dormer HSS, 75mm Overall 4 mm 6
  • RS stock no. 268-6444
  • Mfr. Part No. A1004.0
Subtotal (1 pack of 10 units)
R 510,72(exc. VAT)
R 51,072/unit
1
2
3
144
Results per page