Maxim Integrated DS9503P+T&R, TVS Diode, 6-Pin TSOC
- RS stock no.:
- 190-5994
- Mfr. Part No.:
- DS9503P+T&R
- Manufacturer:
- Maxim Integrated
Stock information currently inaccessible
- RS stock no.:
- 190-5994
- Mfr. Part No.:
- DS9503P+T&R
- Manufacturer:
- Maxim Integrated
Specification
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Maxim Integrated | |
| Diode Configuration | Single | |
| Mounting Type | Surface Mount | |
| Package Type | TSOC | |
| Pin Count | 6 | |
| Maximum Peak Pulse Current | 2A | |
| ESD Protection | Yes | |
| Number of Elements per Chip | 1 | |
| Minimum Operating Temperature | -40 °C | |
| Dimensions | 4 x 3.89 x 1.34mm | |
| Maximum Operating Temperature | +85 °C | |
| Working Voltage | 5V | |
| Maximum Reverse Leakage Current | 100nA | |
| Height | 1.34mm | |
| Length | 4mm | |
| ESD Voltage | 27kV | |
| Width | 3.89mm | |
| Select all | ||
|---|---|---|
Brand Maxim Integrated | ||
Diode Configuration Single | ||
Mounting Type Surface Mount | ||
Package Type TSOC | ||
Pin Count 6 | ||
Maximum Peak Pulse Current 2A | ||
ESD Protection Yes | ||
Number of Elements per Chip 1 | ||
Minimum Operating Temperature -40 °C | ||
Dimensions 4 x 3.89 x 1.34mm | ||
Maximum Operating Temperature +85 °C | ||
Working Voltage 5V | ||
Maximum Reverse Leakage Current 100nA | ||
Height 1.34mm | ||
Length 4mm | ||
ESD Voltage 27kV | ||
Width 3.89mm | ||
- COO (Country of Origin):
- PH
ESD PROTECTION DIODE WITH RESISTORS
Maxim offers ESD-protection diode arrays with low input capacitance, making these devices ideal for high-speed data lines. Selected devices integrate transient voltage suppressors (TVSs) suitable for high-speed operation and general-signal ESD protection.
This DS9503 is an ESD protection device for 1-Wire® interfaces. In contrast to the DS9502, the DS9503 includes two 5Ω isolation resistors on chip. Although 5Ω are negligible during communication, they represent a high impedance relative to the conducting diode during an ESD event. Thus, the diode absorbs the energy while the resistors further isolate and protect the circuit at the other side of the package.
This DS9503 is an ESD protection device for 1-Wire® interfaces. In contrast to the DS9502, the DS9503 includes two 5Ω isolation resistors on chip. Although 5Ω are negligible during communication, they represent a high impedance relative to the conducting diode during an ESD event. Thus, the diode absorbs the energy while the resistors further isolate and protect the circuit at the other side of the package.
Features and Benefits
• Zener characteristic with voltage snap-back to protect against ESD hits
• High avalanche voltage, low leakage and low capacitance avoid signal attenuation
• Compatible to all 5V logic families
• Space-saving, low-inductance TSOC surface-mount package
• On-chip 5 ohm resistors for isolation at both anode and cathode terminals
• Industrial temperature range
• High avalanche voltage, low leakage and low capacitance avoid signal attenuation
• Compatible to all 5V logic families
• Space-saving, low-inductance TSOC surface-mount package
• On-chip 5 ohm resistors for isolation at both anode and cathode terminals
• Industrial temperature range
Zener characteristic with voltage snap-back to protect against ESD hits
High avalanche voltage, low leakage and low capacitance avoid signal attenuation
Compatible to all 5V logic families
Space-saving, low-inductance TSOC surface-mount package
On-chip 5 ohm resistors for isolation at both anode and cathode terminals
Industrial temperature range
High avalanche voltage, low leakage and low capacitance avoid signal attenuation
Compatible to all 5V logic families
Space-saving, low-inductance TSOC surface-mount package
On-chip 5 ohm resistors for isolation at both anode and cathode terminals
Industrial temperature range