ADA4062-4ACPZ-R2 Analog Devices, Low Power, Op Amp, 1.4MHz 1 kHz, 16-Pin LFCSP
- RS stock no.:
- 877-9013P
- Mfr. Part No.:
- ADA4062-4ACPZ-R2
- Manufacturer:
- Analog Devices
Image representative of range
Stock information currently inaccessible
- RS stock no.:
- 877-9013P
- Mfr. Part No.:
- ADA4062-4ACPZ-R2
- Manufacturer:
- Analog Devices
Specification
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Analog Devices | |
| Amplifier Type | Low Power | |
| Mounting Type | Surface Mount | |
| Package Type | LFCSP | |
| Power Supply Type | Dual | |
| Number of Channels per Chip | 4 | |
| Pin Count | 16 | |
| Typical Gain Bandwidth Product | 1.4MHz | |
| Typical Dual Supply Voltage | ±15V | |
| Typical Slew Rate | 3.3V/µs | |
| Maximum Operating Frequency | 1 kHz | |
| Minimum Operating Temperature | -40 °C | |
| Maximum Operating Temperature | +125 °C | |
| Typical Voltage Gain | 83 dB | |
| Offset Voltage | 5mV | |
| Rail to Rail | No | |
| Dimensions | 3.1 x 3.1 x 0.75mm | |
| Width | 3.1mm | |
| Height | 0.75mm | |
| Length | 3.1mm | |
| Typical Input Voltage Noise Density | 36nV/√Hz | |
| Input Offset Current | 25pA | |
| Select all | ||
|---|---|---|
Brand Analog Devices | ||
Amplifier Type Low Power | ||
Mounting Type Surface Mount | ||
Package Type LFCSP | ||
Power Supply Type Dual | ||
Number of Channels per Chip 4 | ||
Pin Count 16 | ||
Typical Gain Bandwidth Product 1.4MHz | ||
Typical Dual Supply Voltage ±15V | ||
Typical Slew Rate 3.3V/µs | ||
Maximum Operating Frequency 1 kHz | ||
Minimum Operating Temperature -40 °C | ||
Maximum Operating Temperature +125 °C | ||
Typical Voltage Gain 83 dB | ||
Offset Voltage 5mV | ||
Rail to Rail No | ||
Dimensions 3.1 x 3.1 x 0.75mm | ||
Width 3.1mm | ||
Height 0.75mm | ||
Length 3.1mm | ||
Typical Input Voltage Noise Density 36nV/√Hz | ||
Input Offset Current 25pA | ||
JFET Input Operational Amplifiers
Analog Devices JFET input operational amplifiers provide high input impedance and ultralow input bias currents. Many of these JFET op amps are suitable for low noise and high speed applications.
Operational Amplifiers, Analog Devices