Schaffner 2A, 250 V ac Male Panel Mount IEC Inlet Filter FN9260B-2-06, Faston 2 Fuse

Lightweight construction
Designed for one or two fuses

Fuses not included

Neutral line must not be fused where it is referenced to earth.

UL recognised component, CSA certified, VDE, SEMKO

The Schaffner IEC inlet filter is a male type, dual fused, panel mount with IEC connector power entry module. It has a voltage rating of 250VAC with 2A high-performance current rating. It is a medical version with a bleed resistor and without Y2 capacitor. The operating frequency of this filter ranges between 0Hz and 400Hz.
Warning:
Neutral line must not be fused where it is referenced to the earth.

Lightweight construction
Fuse drawer with easy access
Fast-On terminals
Optional safety version (A type)
Operating temperature ranges between -25°C and 85°C

Electrical and electronic equipment
Medical equipment
Household equipment
Single-phase and switch-mode power supplies
Test and measurement equipment.

UL approved
CSA certified
VDE
SEMKO
IP40 rated

UL Listed; CSA Certified; VDE; SEMKO

Schaffner Medical FN92XXB and FN28XB Series

IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically stock no. 526-0724).,Low earth leakage current. IEC 950 Compliant.