Microchip, 16 bit Digital Signal Processor 25 MHz 32kB FLASH 28-Pin SOIC

RS stock no.:: 178-4871
Mfr. Part No.:: DSPIC33EV32GM102-I/SO
Manufacturer:: Microchip

Microchip, 16 bit Digital Signal Processor 25 MHz 32kB FLASH 28-Pin SOIC

Image representative of range

Currently unavailable

We don't know if this item will be back in stock, RS intend to remove it from our range soon.

RS stock no.:: 178-4871
Mfr. Part No.:: DSPIC33EV32GM102-I/SO
Manufacturer:: Microchip

Specification

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Microchip
	Product Type	Digital Signal Processor
	Maximum Clock Frequency	25MHz
	Device Million Instructions per Second	70MIPS
	Data Bus Width	16bit
	RAM Size	4kB
	Instruction Set Architecture	C Compiler, DSP, MCU, Modified Harvard
	Program Memory Size	32kB
	Program Memory Type	FLASH
	Minimum Supply Voltage	4.5V
	Numeric and Arithmetic Format	MAC, ALU
	Maximum Supply Voltage	3.6V
	Mount Type	Surface
	Number of PWM Channels	6
	Number of ADCs	1
	Package Type	SOIC
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Pin Count	28
	Length	17.9mm
	Height	2.05mm
	Standards/Approvals	No
	ADC Channels	11
	Timer Resolution	32bit
	ADC Resolution	12bit
	Number of PWM Units	1
	Automotive Standard	AEC-Q100
	PWM Resolution	16bit

	Select all
	Brand Microchip
	Product Type Digital Signal Processor
	Maximum Clock Frequency 25MHz
	Device Million Instructions per Second 70MIPS
	Data Bus Width 16bit
	RAM Size 4kB
	Instruction Set Architecture C Compiler, DSP, MCU, Modified Harvard
	Program Memory Size 32kB
	Program Memory Type FLASH
	Minimum Supply Voltage 4.5V
	Numeric and Arithmetic Format MAC, ALU
	Maximum Supply Voltage 3.6V
	Mount Type Surface
	Number of PWM Channels 6
	Number of ADCs 1
	Package Type SOIC
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Pin Count 28
	Length 17.9mm
	Height 2.05mm
	Standards/Approvals No
	ADC Channels 11
	Timer Resolution 32bit
	ADC Resolution 12bit
	Number of PWM Units 1
	Automotive Standard AEC-Q100
	PWM Resolution 16bit

Datasheet

dsPIC33EVxxxGM00x/10x 16-Bit Digital Signal Controllers

Microchip’s dsPIC33EV family of 16-bit Digital Signal Controllers (DSCs) features a 70 MIPS dsPIC® DSC core with enhanced on-chip features. Capable of operating in harsh environments these devices are suitable for appliance and automotive applications. Rich peripheral integration includes SENT (Single-Edge Nibble Transmission-Transmit/Receive), High Speed PWMs, OP Amps and Error Correcting Code Flash for increased reliability and safety. The performance offered by the dsPIC33EV family of MCUs allows them to be incorporated into the design of high-performance, precision motor control systems that are more energy efficient. They can be used to control BLDC, permanent magnet synchronous, AC induction and stepper motors.

Microcontroller Features

70 MHz Max. CPU Speed

Code-Efficient (C and Assembly) Architecture

16-Bit Wide Data Path

Two 40-Bit Wide Accumulators

Single-Cycle (MAC/MPY) with Dual Data Fetch

Single-Cycle, Mixed-Sign MUL plus Hardware Divide

32-Bit Multiply Support

Intermediate Security for Memory - Provides a Boot Flash Segment in addition to the existing General Flash Segment

Error Code Correction (ECC) for Flash

Added Two Alternate Register Sets for Fast Context Switching

Clock Management Features

Internal, 15% Low-Power RC (LPRC) – 32 kHz

Internal, 1% Fast RC (FRC) – 7.37 MHz

Internal, 10% Backup RC (BFRC) – 7.37 MHz

Programmable PLLs and Oscillator Clock Sources

Fail-Safe Clock Monitor (FSCM)

Additional Fail-Safe Clock Monitor Source (BFRC), Intended to Provide a Clock Fail Switch Source for the System Clock

Independent Watchdog Timer (WDT)

System Windowed Watchdog Timer (DMT)

Fast Wake-Up and Start-Up

Power Management Features

Low-Power Management modes (Sleep, Idle and Doze)

Power Consumption Minimized Executing NOP String

Integrated Power-on Reset (POR) and Brown-out Reset (BOR)

0.5 mA/MHz Dynamic Current (typical)

50 μA at +25°C IPD Current (typical)

Peripheral Features

Up to Six Pulse-Width Modulation (PWM) Outputs (three generators)

Configurable Analogue to Digital Converter (ADC) Module

Up to 4 Operational Amplifiers

Up to 5 Comparators

Charge Time Measurement Unit (CTMU) - Supports mTouch™ capacitive touch sensing

Five 16-bit Timers

Two 32-bit Timers

Four Output Capture modules Configurable as Timers/Counters

Four Input Capture modules

Two Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART)

Two SPI Modules

One I2C Module with SMBus Support