Fuse Holders & Accessories

We offer a superb range of fuse holders and accessories for domestic and commercial use from a range of brands including Schurter, Littelfuse, Cooper Bussmann and Mersen.

What is a fuse holder?

A fuse holder is a casing or housing into which fuses are inserted, simply to hold the fuse in place in order to fulfill its function. They come in many shapes, colours and sizes depending on where they need to be installed.

What types of fuse holder are available?

You will find the following types on the site:

  • Base mount: enables the base of the holder to be attached to something with holes for screws
  • Bottle fuse: a holder for cylindrical bottle fuses, usually with a cap to complete the circuit
  • Inline: a housing for a fuse in a wire or cable, usually for safety purposes
  • Panel mount: another housing with a screw cap that can be mounted into a panel for easy access to the fuse
  • Rail mount: a holder that contains fuses that are slotted into sets with metal contacts

We also stock fuse blocks, clips, switches and covers as well as PCB mounts and other types of accessories.

Why do fuse holders melt?

A fuse holder making poor contact with a fuse can be the cause of this, that is if the fuse has not blown. Current flowing through the electrical circuit, below the fuse's rating, will cause heat from the resistance. This can generate enough heat to cause the fuse holder to melt. It may not be immediate and can happen suddenly after installation.

How do I clean a fuse holder?

  • Ideally wear gloves, either rubber or plastic
  • Ensure the mains power is off and there are no live wires
  • Use a dry cloth or toothbrush to clean the connector springs
  • A small piece of emery cloth wrapped around a screwdriver can be used to scrub the inside of the fuse holder itself
  • Use a small paintbrush to apply lubricant to all areas of the fuse holder once cleaned
Fuse Blocks
Fuse Blocks
Fuse Clips
Fuse Clips
Fuse Covers
Fuse Covers
Fuse Holder Accessories
Fuse Holder Accessories
Fuse Holders
Fuse Holders
Fuse Pullers & Testers
Fuse Pullers & Testers
Neutral Links
Neutral Links
Solid Links
Solid Links

1757 Products showing for Fuse Holders & Accessories

Sort by
8 of 88
In Stock
Eaton 100A Rail Mount Fuse Holder for A2, 1P-Pole, 690V ac
  • RS stock no. 418-489
  • Mfr. Part No. CM100F
Subtotal (1 unit)
R 1 026,79(exc. VAT)
R 1 026,79/unit
In Stock
Eaton 32A Rail Mount Fuse Holder, 3P-Pole, 690V ac
  • RS stock no. 182-1553
  • Mfr. Part No. CHM3DIU
Subtotal (1 box of 4 units)
R 2 054,112(exc. VAT)
R 513,528/unit
In Stock
Eaton 400A Rail Mount Fuse Holder, 690V ac
  • RS stock no. 182-1839
  • Mfr. Part No. SD12-PB
Subtotal (1 unit)
R 188,22(exc. VAT)
R 188,22/unit
In Stock
Wickmann 200A In-line Fuse Holder, 1P-Pole for 41 x 12 x 8.3 mm, 32V dc
  • RS stock no. 174-0633
  • Mfr. Part No. 04980921GXM5
Subtotal (1 pack of 1 unit)
R 159,07(exc. VAT)
R 159,07/pack
In Stock
RS PRO 20A Solid Link for A1 Fuses
  • RS stock no. 242-1049
Subtotal (1 pack of 5 units)
R 330,11(exc. VAT)
R 66,022/unit
In Stock
Schurter 1500 V Fuse Puller
  • RS stock no. 893-6994
  • Mfr. Part No. 0853.1250
Subtotal (1 pack of 5 units)
R 166,83(exc. VAT)
R 33,366/unit
Stocked by manufacturer
Eaton 32A Fuse Holder, 1P-Pole for 156 x 91 x 132 mm, 550V
  • RS stock no. 263-291
  • Mfr. Part No. 32NNSFBSWHITE
Subtotal (1 pack of 10 units)
R 3 969,84(exc. VAT)
R 3 969,84/pack
In Stock
Bulgin 6.3A Base Mount Fuse Holder, 1P-Pole for 5 x 20 mm, 250V ac
  • RS stock no. 213-7586
  • Mfr. Part No. FX0360
Subtotal (1 pack of 5 units)
R 215,07(exc. VAT)
R 43,014/unit
In Stock
Bulgin 6.3A Panel Mount Fuse Holder, 1P-Pole for 5 x 20 mm, 250V ac
  • RS stock no. 122-2598
  • Mfr. Part No. FX0345
Subtotal (1 unit)
R 387,20(exc. VAT)
R 387,20/unit
In Stock
Bulgin 10A In-line Fuse Holder, 250V
  • RS stock no. 893-7073
  • Mfr. Part No. FX0180/BK
Subtotal (1 pack of 5 units)
R 681,07(exc. VAT)
R 136,214/unit
In Stock
Socomec 160A Rail Mount Fuse Holder, 1P-Pole, 690V
  • RS stock no. 233-3343
  • Mfr. Part No. 65001110
Subtotal (1 pack of 3 units)
R 1 020,03(exc. VAT)
R 340,01/unit
In Stock
Eaton Fuse Holder Accessory
  • RS stock no. 418-524
  • Mfr. Part No. 63/100BS
Subtotal (1 pack of 2 units)
R 641,49(exc. VAT)
R 320,745/unit
In Stock
Eaton Fuse Holder Accessory Microswitch
  • RS stock no. 182-1793
  • Mfr. Part No. 170H0099
Subtotal (1 unit)
R 1 398,14(exc. VAT)
R 1 398,14/unit
In Stock
Lovato 32A Fuse Holder for 10 x 38 mm, 1P-Pole, 690V ac
  • RS stock no. 248-5508
  • Mfr. Part No. FB01B1N
Subtotal (1 unit)
R 292,67(exc. VAT)
R 292,67/unit
In Stock
Bulgin 13A Panel Mount Fuse Holder, 1P-Pole for 6.3 x 32 mm, 250V ac
  • RS stock no. 408-369
  • Mfr. Part No. FX0415
Subtotal (1 unit)
R 262,71(exc. VAT)
R 262,71/unit
In Stock
Eaton 20A Panel Mount Fuse Holder, 1P-Pole for 5 x 20 mm, 25V
  • RS stock no. 852-6951
  • Mfr. Part No. HTB-48I-R
Subtotal (1 unit)
R 105,66(exc. VAT)
R 105,66/unit
In Stock
Lovato 32A Rail Mount Fuse Holder, 1P-Pole, 690V ac
  • RS stock no. 216-8276
  • Mfr. Part No. FB01D1P
Subtotal (1 unit)
R 234,83(exc. VAT)
R 234,83/unit
In Stock
Bulgin 10A In-line Fuse Holder, 250V ac
  • RS stock no. 420-050
  • Mfr. Part No. FX0385
Subtotal (1 pack of 5 units)
R 1 048,59(exc. VAT)
R 209,718/unit
In Stock
Eaton 32A Rail Mount Fuse Holder, 2P-Pole, 1.5kV
  • RS stock no. 181-8702
  • Mfr. Part No. CHPV2U
Subtotal (1 unit)
R 399,38(exc. VAT)
R 399,38/unit
In Stock
Eaton 400A Rail Mount Fuse Holder, 3P-Pole, 690V ac
  • RS stock no. 182-1472
  • Mfr. Part No. TD2-IP20
Subtotal (1 unit)
R 544,42(exc. VAT)
R 544,42/unit
1
8
88
Results per page

Related links