Artesyn Switching Power Supply, LPS354-CEF, 15V dc, 23.3A, 350W, 1 Output, 120 → 300 V dc, 85 → 264 V ac

The Artesyn Embedded Technologies LPS354-CEF series embedded switch-mode power supply is 350W, AC to DC plug-in device with a single output. This power supply has active power factor correction, low output ripple, a built-in EMI filter and is supplied with an end mounted fan. It has a universal input supply voltage rating ranging between 85VAC and 264VAC or 120VDC and 300VDC.
Note:
LPS255-CEF series 70°C is 2.5% per °C
Suitable connecting kit for this AC/DC power supply: stock number 151-638

Chassis mount
Efficiency is 75% typical at full load
Enclosed package type
If optional CF or CEF fans are not used, 30CFM forced air cooling needs to be provided and is required through the length of the power supply.
Low output ripple
Not convection rated
Output current is 23.3A at 15VDC
Overvoltage, overload and thermal overload protection
Power fail and remote inhibit
Remote sensing
Safety ground leakage current is less than 0.5mA at 50Hz to 60Hz and 264VAC input
Single wire current sharing
Two supervisory outputs 5V and 12V

VDE: 0805/EN60950 (IEC950)
BABT
BABT: EN60950/BS7002
CB certified
CISPR 22 Class B conducted and radiated
CSA 22.2-234 level 5
CSA certified
EMC compliance to FCC Class B conducted and radiated
EN55022 Class B conducted and radiated
IEC EN6100-3-2 (Active power factor correction)
NEMKO certified
NEMKO: EN 60950/EMKO-TUE (74 sec) 203
UL approved
UL1950

VDE; UL Recognised; CSA Certified; NEMKO; BABT