Telemecanique Sensors Pressure Sensor, 20bar Min, 300bar Max, Relay Output, Differential Reading

Schneider Electric XMLA pressure switches for control circuits are used to control the pressure of hydraulic oils, fresh water, sea water, air, steam, corrosive fluids, or viscous products. The XMLA pressure and vacuum switches have a fixed differential and are for detection of a single threshold.

Fixed differential
External pressure setting window available
1 NO & 1 NC snap acting contacts
Temperature range: –25 to +70 °C
Enclosure rating: IP65 with plug-in connector, IP66 with terminal connections
Operating rate: up to 120 operations / min. for diaphragm and 60 / min. for piston
Media connection: 1/4" NPT
Conduit connection: 1/2" NPT

Pressure quoted is 'per cycle' and (occasional)

Keep your finger on the pulse with this pressure sensor from Telemecanique Sensors. It reads air and fluid pressures in adjustable ranges, with a low setting of 3.5 to 265 bar and a high setting between 20 and 300 bar. This makes it a versatile choice that adapts to the needs of your pneumatic system. The rugged zinc alloy housing is resistant to corrosion and wear for durability in demanding environments. A wide operating temperature range of -25°C to +70°C means the unit doesn't break a sweat in harsh industrial conditions.

• Mechanical lifespan of three million cycles for long-lasting performance
• IP66 rating means it's dust-tight and protected against high-pressure water jets
• Screw-clamp terminals for secure wiring without the need for complex tools
• Compact dimensions of 75 (H) x 35 (W) x 113mm (D) to add minimal bulk to your setup

• Medical equipment
• Aerospace engineering
• Automotive manufacturing
• Pneumatic controls

Installation is a breeze as you can simply attach the G1/4 connector to a compatible port in your pneumatic system.