Recently searched

    Fluke FLUKE I5SPQ3 Power Quality Analyser Clamp, Accessory Type Clamp, For Use With 434 Series, 435 Series

    RS stock no.:
    530-0995
    Mfr. Part No.:
    FLUKE I5SPQ3
    Manufacturer:
    Fluke
    Fluke
    View this category
    On back order for despatch 2022/08/25
    Add to Basket
    Set(s)

    Added

    Price (Excl VAT) 1 Set

    R 29,141.28

    (exc. VAT)

    R 33,512.47

    (inc. VAT)

    Set(s)Per Set
    1 +R 29,141.28
    RS stock no.:
    530-0995
    Mfr. Part No.:
    FLUKE I5SPQ3
    Manufacturer:
    Fluke

    Not Applicable

    COO (Country of Origin):
    FR

    Legislation and Compliance

    Not Applicable

    COO (Country of Origin):
    FR

    Product Details

    Fluke 434 & 435 3 Phase Power Quality Analysers (3U+I)


    Fluke power quality analysers help locate, predict, prevent and troubleshoot problems in power distribution systems and include many features to capture details to pinpoint problems quickly and safely. Troubleshooting is fast with on-screen display of trends and captured events, even while background recording continues.


    Complete three-phase troubleshooting tool: measures voltage, current, frequency, power, unbalance and flicker, harmonics, inter harmonics, power consumption (Energy) and inrush
    AutoTrend: Every displayed reading is automatically and continuously recorded without having to set up threshold levels or interval times
    Displays trends in voltage, current, frequency, power, harmonics or flicker on all three phases plus neutral
    Analyse the trends using the cursors and zoom function while background recording continues
    System-Monitor: gives immediate insight into power system’s quality. Checks conformity to limits specified in EN50160 or to user defined limits. The overview is shown on a single screen, with colour-coded bars clearly indicating which parameters fall outside the limits
    Inrush mode for troubleshooting nuisance circuit breaker tripping
    Four channels: simultaneously measures voltage and current on all three phases and neutral
    Meets EN61010-1 600 V CAT IV, 1000 V CAT III safety standard required for measurements at the service entrance.
    Rugged, handheld instrument operates for more than 7 hours on included rechargeable NiMH battery pack
    Complies with IEC 61000-4-30 measurement standards.
    Stored measurements can be transferred to a PC to view graphs and generate reports with FlukeView software with OC4USB interface adaptor / cable (supplied)
    Automatic transient display: captures up to 40 dips, swells, interruptions or transients automatically
    8MByte memory, shared memory divided between logging, screens and datasets
    Supplied with i400s ac current clamp (4 supplied) range 0.5A to 400A; , maximum conductor diameter 32mm. Safety rating CAT IV, 600V


    Fluke 435 Advanced Features


    Fully Class A Compliant - conduct tests according to the stringent international IEC 61000-4-30 Class A standard
    Configure for any test condition with memory for over 400 parameters at user defined intervals
    16MByte memory, shared memory divided between logging, screens and datasets
    Measure interference from specific frequency signals with mains signalling function
    i430 flexible current clamp (4 supplied as standard) range 30A to 3000A ac; , maximum conductor diameter 160mm. Safety rating CAT IV, 600V
    C435, Hard carrying case with handle and wheels
    PowerLog software


    Current Clamp Options


    i430Flex 3000A ac flexible current clamps (set of 4 supplied as standard with 435) range 30A to 3000A, maximum conductor diameter 160mm. Safety rating EN610101 CAT IV, 600V
    i5sPQ3: 5Aac current clamps (3 in a set) range 10mA to 5A; maximum conductor diameter 15mm, Safety rating EN610101 CAT III 600V
    i1000s, ac current clamp (sold individually) range 0.1A to 1000 A rms, maximum conductor diameter 54mm. Safety rating EN610101 CAT III 600V


    Note

    3 year warranty on Analyser units 434 & 435 only.

    Supplied with

    Hard carrying case (Fluke 434 with C434, Fluke 435 with C435 with handle and wheels), 4 current probes, 5 test leads and crocodile clips, NiMH battery charger, BP190 NiMH rechargeable battery (installed), FlukeView analysis (Fluke 434 and 435) & PowerLog software (Fluke 435 only), OC4USB optical USB cable, colour localisation set, quick start printed manual, user manual CD.

    Fluke AC Current Clamp


    The Fluke 3 pieces of the i5s current clamps has a current range of 5A, especially configured to provide low current accuracy while taking measurements on secondary current transformers. This cost-saving 3-pack is perfect for use with 3-phase tools such as the Fluke 434 or Fluke 435. The compact shape makes transporting and storing convenient.


    Features and Benefits


    Compact shape makes transporting and storing convenient
    the clamp measures only 116mm x 43mm x 23mm (4.6in x 1.7in x 0.9in)
    Take accurate readings without breakings the circuit
    Crest factor ≤ 3, add 0.7% to accuracy
    Input load impedance > 1Mohm in parallel with up to 47pF
    Output level(s) is 400mV/A
    Useable frequency ranges between 40Hz and 5kHz


    Certifications


    CAT III 600V safety rated
    IEC/EN61010-1



    Specification

    AttributeValue
    Accessory TypeClamp
    For Use With434 Series, 435 Series
    On back order for despatch 2022/08/25
    Add to Basket
    Set(s)

    Added

    Price (Excl VAT) 1 Set

    R 29,141.28

    (exc. VAT)

    R 33,512.47

    (inc. VAT)

    Set(s)Per Set
    1 +R 29,141.28