Hirschmann Test & Measurement 932793001 Test Equipment Set
- RS stock no.:
- 738-339
- Mfr. Part No.:
- 932793001
- Manufacturer:
- Hirschmann Test & Measurement
115 Available from UK/Europe in 4–6 working days for collection or delivery to major cities (Heavy, hazardous or lithium product excluded. Delivery T&C's apply)
Price (Excl VAT) Each
R 759,39
(exc. VAT)
R 873,30
(inc. VAT)
| Units | Per unit |
| 1 + | R 759,39 |
- RS stock no.:
- 738-339
- Mfr. Part No.:
- 932793001
- Manufacturer:
- Hirschmann Test & Measurement
Not Applicable
- COO (Country of Origin):
- DE
Hirschmann Test & Measurement Multimeter Safety Probe Set
Brought to you by Hirschmann Test & Measurement. A high-quality 4 mm test lead set ideal for general laboratory use. Connecting to multimeters, these test leads and probes provide excellent precision within electronic readings. All models are highly reliable and excellent quality.
Features and Benefits
• 4 mm plugs
• Gripper and hard point test probes
• 1m lead length
• Maximum working voltage - 60 V dc
• Gripper and hard point test probes
• 1m lead length
• Maximum working voltage - 60 V dc
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Hirschmann Test & Measurement, each probe provides much-needed precision.
What are the differences between safety categories?
For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.
Kit Contents
• Red and black hard point test probes
• Red and black gripper test probes
• Red and black crocodile clips (clasping dia. 9.5 mm)
• Red and black PVC 1m stackable test leads
• Red and black gripper test probes
• Red and black crocodile clips (clasping dia. 9.5 mm)
• Red and black PVC 1m stackable test leads
Red and black hard point test probes
Red and black gripper test probes
Red and black crocodile clips (clasping dia. 9.5mm)
Red and black PVC 1m stackable test leads
Maximum working voltage 60V d.c.
Red and black gripper test probes
Red and black crocodile clips (clasping dia. 9.5mm)
Red and black PVC 1m stackable test leads
Maximum working voltage 60V d.c.
High quality 4mm test lead set ideal for general laboratory use.
Contents:
Contents:
Attribute | Value |
|---|---|
| Lead Type | Test Equipment Set |
| Connector Type | Crocodile Clip, Spring Loaded Plug |
| Lead Length | 1m |
| Minimum Operating Temperature | -15°C |
| Maximum Operating Temperature | +70°C |
- RS stock no.:
- 738-339
- Mfr. Part No.:
- 932793001
- Manufacturer:
- Hirschmann Test & Measurement
Not Applicable
- COO (Country of Origin):
- DE
Hirschmann Test & Measurement Multimeter Safety Probe Set
Brought to you by Hirschmann Test & Measurement. A high-quality 4 mm test lead set ideal for general laboratory use. Connecting to multimeters, these test leads and probes provide excellent precision within electronic readings. All models are highly reliable and excellent quality.
Features and Benefits
• 4 mm plugs
• Gripper and hard point test probes
• 1m lead length
• Maximum working voltage - 60 V dc
• Gripper and hard point test probes
• 1m lead length
• Maximum working voltage - 60 V dc
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Hirschmann Test & Measurement, each probe provides much-needed precision.
What are the differences between safety categories?
For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.
Kit Contents
• Red and black hard point test probes
• Red and black gripper test probes
• Red and black crocodile clips (clasping dia. 9.5 mm)
• Red and black PVC 1m stackable test leads
• Red and black gripper test probes
• Red and black crocodile clips (clasping dia. 9.5 mm)
• Red and black PVC 1m stackable test leads
Red and black hard point test probes
Red and black gripper test probes
Red and black crocodile clips (clasping dia. 9.5mm)
Red and black PVC 1m stackable test leads
Maximum working voltage 60V d.c.
Red and black gripper test probes
Red and black crocodile clips (clasping dia. 9.5mm)
Red and black PVC 1m stackable test leads
Maximum working voltage 60V d.c.
High quality 4mm test lead set ideal for general laboratory use.
Contents:
Contents:
Attribute | Value |
|---|---|
| Lead Type | Test Equipment Set |
| Connector Type | Crocodile Clip, Spring Loaded Plug |
| Lead Length | 1m |
| Minimum Operating Temperature | -15°C |
| Maximum Operating Temperature | +70°C |