Ambersil Chain Lubricant
The Ambersil 400ml Perma-Lock chain lubricant oil is a high-performance chain and conveyor lubricant based on stable vegetable oils and PTFE. It is a colourless and odourless food-grade lubricant formulated using only food-grade acceptable components. The gentle foaming action assures an excellent penetration and prevents against dripping. This oil not only provides protection but also, effective lubrication in case of contact with food. It comes in an aerosol and has a straw attached to make it easier to control and get to the hard to reach areas. This range of Ambersil food-grade lubricants performs the same technical functions as other lubricant giving you the protection against wear, friction and corrosion.
All industries have issues with lubricant leakage and maintenance. Production equipment needs excellent lubrication to keep machines running, so choosing the correct lubricant is crucial.
The food processing and pharmaceutical industries have extra challenges with ensuring that the lubricants used to resist degradation from food products, chemicals, and steam/water. They must exhibit a neutral behaviour towards plastics and elastomers, can dissolve sugars and complying with current food/health and safety regulations meaning that they are physiologically inert, tasteless and odourless.
Note
Use sparingly. More information on how to use and further applications can be found on the datasheet.
Caution
Do not mix with other lubricants. Do not use on energised equipment.
Features and Benefits
Non-slip grip
Non-drip foaming action
Excellent penetration and lubrication properties
Resistant to water wash off
Prevents corrosion
PTFE helps reduce friction and wear
Leaves a long-lasting film
Operating temperature ranges between -15 °C and 175 °C
Does not contain nut oils or nut oil derivatives
Can be used at any angle including upside down because of the 360° spray
Shelf life of 72 months
Applications
Chain drives
Pulleys
Rollers
Open gears
Transfer belts
Hoists
Hinges
Forklifts
Overhead door drivers
Certifications
NSF H1 registered
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
