Keysight Technologies LCR Meter Tweezer for Use with U1731C, U1732C, U1733C

The Keysight U1782B is an 815mm long tweezer for use with the Keysight U1700 Series handheld capacitor and handheld LCR meters. For noise immunity, the tweezer has a guard end for connection to the meter's guard terminal. This tweezer has been designed with new shielded rigid cable to improve usability and measurement stability.

Tweezer for testing capacitance, inductance or resistance of SMD components
Measurement accuracy for capacitance (tweezers open) < 0.7pF
Measurement accuracy for resistance (tweezers short) < 0.5Ω
Measurement accuracy for inductance (tweezers short) < 1.2μH

Use this LCR meter tweezer from Keysight Technologies to take precise inductance, capacitance and resistance readings on surface-mounted devices. It's designed for use with measurement devices in the U1700 series for ease of assembly. The tweezer has a guard end that's connected to the meter to ensure noise immunity for precise readings. For safe operation, its probe pins are housed in an insulated handle, helping to minimise the risk of electric shocks.

• Designed for one-handed operation for ease of use
• Shielded rigid cable for resistance to impact and wear
• Total length of 815mm for easy access to contact points on the circuit board

• Measurements and instrumentation
• Assembly lines

This tweezer has a measurement accuracy of μH for inductance, so you can rely on it for precise results.

You can maintain this tweezer by cleaning it with a gauze or soft cloth soaked in a diluted soft detergent. For safety, be sure to disconnect it from the meter and test points before you clean it.