HARTING Connector Set, 16 Way, 16A, Male, Han E, 500 V

From Harting, this combination of components is part of the Han E range of Connector Assembly Packs.

Male and female inserts may be fitted to a hood or housing if the installation requires such a reverse configuration.

UL, CSA, SEV

This connector set includes the 09330062601 male insert screw and the 19300161521 side entry hood for industrial connector applications.

Screw termination from 18 AWG to 14 AWG with wire protection
6 pole male insert
Polycarbonate (PC) insert
Colour is RAL 7032 (pebble grey)
Rated to 16 A and 500 V
Mechanical working life of ≥ 500 mating cycles
Contact resistance of ≤ 1 mΩ
Size: 6 B
Conductor cross-section: 0.75 - 2.5 mm²
Material contacts, - Copper alloy
Surface contacts - Silver plated
Stripping length 7.5 mm
Flammability UL 94V-0

Double locking lever
Size: 16 B
IP65 rating
Aluminium die cast material
Colour (hood/housing) RAL 7037 (dust grey)
Low construction

Product Application Information

Harting industrial connectors are suitable for all applications that require a safe and removable electrical connection in protected electrical areas.

Han E® Connector Assembly Packs

Two-part packs that provide towards the assembly of Harting Han E® metal-bodied cable plugs, cable coupling hoods, bulkhead/panel mounting housings, and surface mounting housing sockets. Screw terminal connection. Each pack contains a hood or housing, and male or female insert. All the individual components are available separately from within the relevant Ranges of inserts, hoods, and housings. All are rated at 450 – 500V, and 16A, suitable cable glands are available separately