Trenz Electronic GmbH Programmable Logic Development Kits
The Trenz electronic is an FPGA module integrating a Xilinx Artix-7 100T FPGA, 32Mb Quad SPI flash memory for configuration and operation. It has powerful switch-mode power supplies for all on-board voltages. The rugged high-speed stacking strips provide a large number of configurable I/Os. All this on a tiny footprint, smaller than a credit card. It has an electric rating of either 3.3V or 3.3V and 5V. It is used for industrial applications.
Features and Benefits:
• 100MHz MEMS oscillator • AES bit-stream encryption • Dual 100MBit Ethernet • eFUSE bit-stream encryption • Evenly spread supply pins for good signal integrity • It has 200MHz speed • Lead free • MAC address EEPROM • on-board high efficiency DC-DC converters • Operating temperature ranges between 0°C and 70°C • Plug-on module with two 100-pin hermaphroditic stacking strips • Rugged for shock and high vibration • Single-ended FPGA I/O pins available on B2B strips Up to 112 • System management and power sequencing
Certifications:
• WEEE
Attribute
Value
Classification
Module
Programmable Logic Technology
CPLD, FPGA
Kit Classification
Module
Technology
CPLD, FPGA
For Use With
Modules in 4 x 5 cm Form Factors
Featured Device
TE0711-01
Kit Name
High IO Xilinx Artix-7 100T Module with speedgrade 2C and USB
