Igus Bearing Thrust Washer Thrust Washer For Use With Shaft, JTM-0818-015
- RS stock no.:
- 750-6851
- Mfr. Part No.:
- JTM-0818-015
- Manufacturer:
- Igus
Image representative of range
Bulk discount available
Subtotal (1 bag of 12 units)*
R 584,11
(exc. VAT)
R 671,73
(inc. VAT)
Stock information currently inaccessible - Please check back later
Bag(s) | Per Bag | Per unit* |
|---|---|---|
| 1 - 5 | R 584.11 | R 48.676 |
| 6 - 11 | R 569.51 | R 47.459 |
| 12 + | R 552.42 | R 46.035 |
*price indicative
- RS stock no.:
- 750-6851
- Mfr. Part No.:
- JTM-0818-015
- Manufacturer:
- Igus
Specification
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Igus | |
| Product Type | Thrust Washer | |
| Sub Type | Bearing Thrust Washer | |
| Inside Diameter | 8 mm | |
| Dimensions | 15 x 1.5 x 18 mm | |
| Standards/Approvals | No | |
| For Use With | Shaft | |
| Select all | ||
|---|---|---|
Brand Igus | ||
Product Type Thrust Washer | ||
Sub Type Bearing Thrust Washer | ||
Inside Diameter 8 mm | ||
Dimensions 15 x 1.5 x 18 mm | ||
Standards/Approvals No | ||
For Use With Shaft | ||
- COO (Country of Origin):
- DE
iglidur® J Bush Kits
iglidur® J plain bearings may be used for long-life applications, and are also suitable for use with soft shafts. The iglidur® J plain bearings are designed to provide the lowest coefficient of friction while running dry, and offer a low stick-slip tendency.
Waterproof material
Extremely low friction
Can be used with stainless steel or anodised aluminium shafts
Resistant to dirt and dust
No lubrication required
iglidur® kits offering a variety of plain plastic bush options in convenient kit form from igus®. iglidur® polymer bearings offer high performance characteristics across a wide and varied field of application including, but not limited to: automotive (gear shift linkage), mechanical excavator (operator's shock absorbing seat), mountain bike (suspension and other components), packaging machinery (lubricant-free bearings), catering equipment (chemical and corrosion-resistant bearings), model aircraft (aileron mounting), bottling plant (polymer bearings), offshore oil industry (plastic bearings for corrosive environment), and a whole host of other uses within a wide variety of applications.
Note
iglidur® J plain bearings are not suitable for use where a maximum permissible surface pressure of 35 MPa may occur, where high pressures may be present, where there are short-term temperature increases (above 120°C), or applications where a low-cost bearing for occasional movement is required.
Related links
- Igus Bearing Thrust Washer Thrust Washer For Use With Shaft, JTM-1224-015
- Igus Bearing Thrust Washer Thrust Washer For Use With Shaft, JTM-2036-015
- Igus Bearing Thrust Washer Thrust Washer For Use With Shaft, JTM-0615-015
- Igus Bearing Thrust Washer Thrust Washer For Use With Plain Bearings, GTM-2036-015
- Igus Bearing Thrust Washer Thrust Washer, GTM-1630-015
- Igus Bearing Thrust Washer Thrust Washer, GTM-1426-015
- Igus Bearing Thrust Washer Thrust Washer, GTM-1832-015
- Igus Bearing Thrust Washer Thrust Washer, GTM-1524-015