Schneider Electric Auxiliary Contact, 4 Contact, 1NC + 3NO, Side Mount

Blocks of instantaneous auxiliary contacts can be added to the right of Integral 63 circuit breaker.

Block of 6 contacts comprising:
3 contactor status contacts 2 N/O + 1 N/C
1 x 1CO rotating button position status other than "Auto".
1 x 1CO short circuit trip indicator contact
1 x 1CO all-trips indicator contact

Block of 5 contacts comprising:
3 contactor status contacts 2 N/O + 1 N/C
1 x 1CO short circuit trip indicator contact
1 x 1CO all-trips indicator contact

Block of 4 contacts comprising:
3 contactor status contacts 2 N/O + 1 N/C
1 x 1 N/O + 1 N/C all-trips indicator contact, to be configured by the user.

The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.

First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option