Digi International Xbee ZigBee Module, +18dBm, 3.3V CMOS UART Pan

The XBee-PRO OEM is an IEEE 802.15.4 compliant RF transceiver module. It operates in the 2.4GHz ISM Band. It has a high-power output and high receiver sensitivity so it can provide long-range line-of-sight communication for up to 1 km.

Carrier frequency: 2.4 GHz ISM band with 12 channels
RF Power Output: up to +18 dBm
Receiver Sensitivity: -100 dBm @ 1% PER
Interference control: Direct Sequence Spread Spectrum (DSSS)
OTA Date Rate: up to 250 kbps
Host communication: serial UART with RTS/CTS flow control
Supported network topologies: Point-to-Point, Point-to-Multipoint & Peer-to-Peer
Source/Destination Addressing
Unicast & Broadcast Communications
AES-128 encryption
Antenna: Integral Whip (RS 436-496), External via U.FL (RS 436-503), PCB (RS 761-7406)
6 channel 10-bit ADC
8 x GPIO pins
Power supply: +2.8 V to +3.4 Vdc
Operating temperature range: -40 to +85°C
Dimensions: 24.4 x 32.9 x 7 mm DIL format
Applications: Long-range communication for the Internet of Things (IoT)

FCC, IC, ETSI (Max +10 dBm output power), Telec

XBee-PRO 802.15.4 OEM RF module is an embedded solution providing wireless end-point connectivity to devices. The module uses the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. This module is designed for high-throughput applications requiring low latency and predictable communication timing. 10mW power output and at a range from 0 – 1.6 km.