Infineon CYPD2704-09FNXIT, USB Controller, USB, 2.7 to 5.5 V, 9-Pin CSP
- RS stock no.:
- 181-3767P
- Mfr. Part No.:
- CYPD2704-09FNXIT
- Manufacturer:
- Infineon
2925 Available from UK/Europe in 4–6 working days for collection or delivery to major cities (Heavy, hazardous or lithium product excluded. Delivery T&C's apply)
Not Available for premium delivery
Added
Price (Excl VAT) Each (Supplied on a Reel) Quantities below 150 on continuous strip
R 17,502
(exc. VAT)
R 20,127
(inc. VAT)
| Units | Per unit |
| 50 - 120 | R 17,502 |
| 125 - 245 | R 16,976 |
| 250 - 495 | R 16,296 |
| 500 + | R 15,644 |
- RS stock no.:
- 181-3767P
- Mfr. Part No.:
- CYPD2704-09FNXIT
- Manufacturer:
- Infineon
Technical data sheets
Legislation and Compliance
Product Details
Type-C Support and USB-PD Support
Supports USB PD3.0 spec and USB Type-C spec version 1.3 (Including support for the revised minimum VCONN operating voltage of 3 V)
Integrated high-voltage protection on CC, VCONN1, and VCONN2 pins to protect against accidental shorts to the VBUS pin on the Type-C connector
40-byte storage programmable over Type-C interface for storing vendor-, device-, and cable-specific configuration data
Termination resistor RA on VCONN1 and VCONN2
Supports RA weakening to reduce power consumption
Supports electronically marked passive cable implementations with one or two controllers Clocks and Oscillators
Integrated oscillator eliminating the need for external clock Power
2.7 V to 5.5 V operation
Sleep: 1.7 mA System-Level ESD Protection
On CC, VCONN1, and VCONN2 pins
± 8 kV Contact Discharge and ±15 kV Air Gap Discharge
Package
9-ball WLCSP
Supports industrial temperature range (-40 °C to +85 °C)
Supports USB PD3.0 spec and USB Type-C spec version 1.3 (Including support for the revised minimum VCONN operating voltage of 3 V)
Integrated high-voltage protection on CC, VCONN1, and VCONN2 pins to protect against accidental shorts to the VBUS pin on the Type-C connector
40-byte storage programmable over Type-C interface for storing vendor-, device-, and cable-specific configuration data
Termination resistor RA on VCONN1 and VCONN2
Supports RA weakening to reduce power consumption
Supports electronically marked passive cable implementations with one or two controllers Clocks and Oscillators
Integrated oscillator eliminating the need for external clock Power
2.7 V to 5.5 V operation
Sleep: 1.7 mA System-Level ESD Protection
On CC, VCONN1, and VCONN2 pins
± 8 kV Contact Discharge and ±15 kV Air Gap Discharge
Package
9-ball WLCSP
Supports industrial temperature range (-40 °C to +85 °C)
Specification
Attribute | Value |
|---|---|
| Number of Transceivers | 1 |
| IC Type | Controller IC |
| Protocols Supported | USB |
| Power Supply Type | Single |
| ESD Protection | Yes |
| Typical Single Supply Voltage | 2.7 to 5.5 V |
| Mounting Type | Surface Mount |
| Package Type | CSP |
| Pin Count | 9 |
| Dimensions | 1.35 x 1.37 x 0.27mm |
| Height | 0.27mm |
| Length | 1.35mm |
| Maximum Operating Temperature | +85 °C |
| Width | 1.37mm |
| Minimum Operating Temperature | -40 °C |