Honeywell HIH-4000 Series Humidity Sensor, Analogue Output, Through Hole Mount, Analogue, ±3.5%RH, 3 Pins
- RS stock no.:
- 874-4562
- Mfr. Part No.:
- HIH-4000-004
- Manufacturer:
- Honeywell
On back order for despatch 2024/07/31
Not Available for premium delivery
Price (Excl VAT) Each
R 1 261,50
(exc. VAT)
R 1 450,72
(inc. VAT)
| Units | Per unit |
| 1 + | R 1 261,50 |
- RS stock no.:
- 874-4562
- Mfr. Part No.:
- HIH-4000-004
- Manufacturer:
- Honeywell
HIH-4000/4020/4021 Series Humidity Sensors, Honeywell
The HIH-4000 series has been specifically designed for use in high volume OEM (Original Equipment Manufacturer) applications. These sensors utilise a near linear voltage output making direct input to a controller or other devices possible. They are ideally suited for low drain, battery operated systems with a typical current draw of only 200 μA. Potential Applications:Refrigeration equipmentHVAC equipmentMedical equipmentDryingMeteorologyBattery-powered systemsOEM assemblies
Features:Moulded thermoset plastic housingNear linear voltage output vs %RHLaser-trimmed interchangeabilityEnhanced accuracy, fast responseFast response timeStable, low drift performanceChemically resistant
Honeywell Humidity Sensor, 3 Pin, 5.8V - HIH-4000 Series - HIH-4000-004
This humidity sensor from Honeywell uses a clever SIP (system-in-package) design to keep it compact. Its small size of 4.17 (length) by 2.03mm (width) means it fits in where space is tight. The sensor is a highly efficient and accurate component. It's laser-trimmed and uses a capacitive sensing element and integrated signal conditioning for a quick and reliable response. The linear voltage output draws a current of just 200μA (microamps), making it a low-power component that's well-suited to battery-operated devices. This humidity sensor has a moulded and layered thermoset plastic case to make it chemical, oil and dust resistant for a long service life.
Features & Benefits
• Through-hole mounting for quick and secure installation on PCBs (printed circuit boards)
• Wide operating temperature range of -40°C to +85°C for use in extreme conditions or outdoors
• Works with supply voltages between 4 and 5.8V for greater flexibility
• Wide operating temperature range of -40°C to +85°C for use in extreme conditions or outdoors
• Works with supply voltages between 4 and 5.8V for greater flexibility
Applications
• OEM (original equipment manufacturer) assemblies
• Refrigeration and HVAC (heating, ventilation and air conditioning) equipment
• Measurement and control systems
• Refrigeration and HVAC (heating, ventilation and air conditioning) equipment
• Measurement and control systems
What conditions is this sensor calibrated to?
This device is calibrated at 5V DC and +25ºC, ready for immediate installation in your controller or device under normal conditions.
Temperature & Humidity Sensors, Honeywell
Attribute | Value |
|---|---|
| Sensor Function | Humidity Sensor |
| Output Type | Analogue |
| Interface Type | Analogue |
| Accuracy | ±3.5%RH |
| Mounting Type | Through Hole |
| Pin Count | 3 |
| Operating Temperature Range | -40 → +85 °C |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +85 °C |
| Minimum Operating Supply Voltage | 4 V |
| Maximum Operating Supply Voltage | 5.8 V |
| Package Type | SIP |
| Length | 4.17mm |
| Series | HIH-4000 |
| Height | 8.59mm |
| Width | 2.03mm |
| Dimensions | 4.17 x 2.03 x 8.59mm |
| Sensor Gain | -4mV/°C |
- RS stock no.:
- 874-4562
- Mfr. Part No.:
- HIH-4000-004
- Manufacturer:
- Honeywell
HIH-4000/4020/4021 Series Humidity Sensors, Honeywell
The HIH-4000 series has been specifically designed for use in high volume OEM (Original Equipment Manufacturer) applications. These sensors utilise a near linear voltage output making direct input to a controller or other devices possible. They are ideally suited for low drain, battery operated systems with a typical current draw of only 200 μA. Potential Applications:Refrigeration equipmentHVAC equipmentMedical equipmentDryingMeteorologyBattery-powered systemsOEM assemblies
Features:Moulded thermoset plastic housingNear linear voltage output vs %RHLaser-trimmed interchangeabilityEnhanced accuracy, fast responseFast response timeStable, low drift performanceChemically resistant
Honeywell Humidity Sensor, 3 Pin, 5.8V - HIH-4000 Series - HIH-4000-004
This humidity sensor from Honeywell uses a clever SIP (system-in-package) design to keep it compact. Its small size of 4.17 (length) by 2.03mm (width) means it fits in where space is tight. The sensor is a highly efficient and accurate component. It's laser-trimmed and uses a capacitive sensing element and integrated signal conditioning for a quick and reliable response. The linear voltage output draws a current of just 200μA (microamps), making it a low-power component that's well-suited to battery-operated devices. This humidity sensor has a moulded and layered thermoset plastic case to make it chemical, oil and dust resistant for a long service life.
Features & Benefits
• Through-hole mounting for quick and secure installation on PCBs (printed circuit boards)
• Wide operating temperature range of -40°C to +85°C for use in extreme conditions or outdoors
• Works with supply voltages between 4 and 5.8V for greater flexibility
• Wide operating temperature range of -40°C to +85°C for use in extreme conditions or outdoors
• Works with supply voltages between 4 and 5.8V for greater flexibility
Applications
• OEM (original equipment manufacturer) assemblies
• Refrigeration and HVAC (heating, ventilation and air conditioning) equipment
• Measurement and control systems
• Refrigeration and HVAC (heating, ventilation and air conditioning) equipment
• Measurement and control systems
What conditions is this sensor calibrated to?
This device is calibrated at 5V DC and +25ºC, ready for immediate installation in your controller or device under normal conditions.
Temperature & Humidity Sensors, Honeywell
Attribute | Value |
|---|---|
| Sensor Function | Humidity Sensor |
| Output Type | Analogue |
| Interface Type | Analogue |
| Accuracy | ±3.5%RH |
| Mounting Type | Through Hole |
| Pin Count | 3 |
| Operating Temperature Range | -40 → +85 °C |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +85 °C |
| Minimum Operating Supply Voltage | 4 V |
| Maximum Operating Supply Voltage | 5.8 V |
| Package Type | SIP |
| Length | 4.17mm |
| Series | HIH-4000 |
| Height | 8.59mm |
| Width | 2.03mm |
| Dimensions | 4.17 x 2.03 x 8.59mm |
| Sensor Gain | -4mV/°C |