INA HK0910-B 9mm I.D Drawn Cup Needle Roller Bearing, 13mm O.D
- RS stock no.:
- 194-6935
- Mfr. Part No.:
- HK0910-B
- Manufacturer:
- INA
On back order for despatch 2024/06/11
Not Available for premium delivery
Added
Price (Excl VAT) Each
R 106,20
(exc. VAT)
R 122,13
(inc. VAT)
| Units | Per unit |
| 1 - 4 | R 106,20 |
| 5 - 9 | R 103,55 |
| 10 - 24 | R 100,44 |
| 25 + | R 96,42 |
- RS stock no.:
- 194-6935
- Mfr. Part No.:
- HK0910-B
- Manufacturer:
- INA
Technical data sheets
Legislation and Compliance
Product Details
Are particularly suitable for Applications with a very small radial section height on account of their very low cross-sectional height
Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
Can support high radial loads (are pure radial bearings)
Require a considerably smaller radial design envelope than machined needle roller bearings
Usually run directly on the shaft (no inner ring)
Permit relatively high speeds
Are easy to mount
Require no additional means of axial retention (as a result of which the housing bore is easy to produce)
Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)
Result in particularly compact, cost-effective and economical bearing arrangements
Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
Can support high radial loads (are pure radial bearings)
Require a considerably smaller radial design envelope than machined needle roller bearings
Usually run directly on the shaft (no inner ring)
Permit relatively high speeds
Are easy to mount
Require no additional means of axial retention (as a result of which the housing bore is easy to produce)
Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)
Result in particularly compact, cost-effective and economical bearing arrangements
Specification
Attribute | Value |
|---|---|
| Inside Diameter | 9mm |
| Outside Diameter | 13mm |
| Roller Bearing Type | Drawn Cup Needle |
| Race Width | 10mm |
| Bore Type | Parallel |
| Material | Steel |
| Static Load Rating | 4650N |
| Cage Material | Sheet Steel |
| Number of Rows | 1 |
| Dynamic Load Rating | 4250N |
| End Type | Open |
| Fatigue Limit Load | 610N |