INA NJ214-E-XL-TVP2 70mm I.D Cylindrical Roller Bearing, 125mm O.D
- RS stock no.:
- 191-3905
- Mfr. Part No.:
- NJ214-E-XL-TVP2
- Manufacturer:
- INA
2 Available from UK/Europe in 4–6 working days for collection or delivery to major cities (Heavy, hazardous or lithium product excluded. Delivery T&C's apply)
Not Available for premium delivery
Added
Price (Excl VAT) Each
R 3 084,56
(exc. VAT)
R 3 547,24
(inc. VAT)
| Units | Per unit |
| 1 - 4 | R 3 084,56 |
| 5 - 9 | R 3 007,45 |
| 10 - 24 | R 2 917,23 |
| 25 + | R 2 800,54 |
- RS stock no.:
- 191-3905
- Mfr. Part No.:
- NJ214-E-XL-TVP2
- Manufacturer:
- INA
Technical data sheets
Legislation and Compliance
Product Details
Bearing arrangements are subjected to very high radial loads
Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position (semi-locating or locating bearing function)
Bearing arrangements must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing (in the case of bearings with a non-locating or semi-locating bearing function)
High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
The bearings should be separable (one bearing ring can be removed) for easier mounting
Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position (semi-locating or locating bearing function)
Bearing arrangements must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing (in the case of bearings with a non-locating or semi-locating bearing function)
High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
The bearings should be separable (one bearing ring can be removed) for easier mounting
Specification
Attribute | Value |
|---|---|
| Inside Diameter | 70mm |
| Outside Diameter | 125mm |
| Roller Bearing Type | Cylindrical |
| Race Width | 24mm |
| Bore Type | Parallel |
| Static Load Rating | 138000N |
| Cage Material | Plastic |
| Number of Rows | 1 |
| Dynamic Load Rating | 141000N |
| End Type | Open |
| Fatigue Limit Load | 24500N |