RF Solutions, LoRa Module Transceiver 868MHz, -148dBm Receiver Sensitivity
- RS stock no.:
- 181-2479
- Mfr. Part No.:
- LAMBDA62-8D
- Manufacturer:
- RF Solutions
15 Available from UK/Europe in 4–6 working days for collection or delivery to major cities (Heavy, hazardous or lithium product excluded. Delivery T&C's apply)
Not Available for premium delivery
Price (Excl VAT) Each
R 335,30
(exc. VAT)
R 385,60
(inc. VAT)
| Units | Per unit |
| 1 - 4 | R 335,30 |
| 5 + | R 326,92 |
- RS stock no.:
- 181-2479
- Mfr. Part No.:
- LAMBDA62-8D
- Manufacturer:
- RF Solutions
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
RF Solution Module
The RF Solutions LAMBDA62-8D series DIP package transceiver module is operated at 868MHz frequency. It has an electrical rating between 1.6V and 3.3V. This module is a leading, cost-efficient radio module featuring ultra-long range, spread spectrum communication and high interference immunity within minimal current consumption.
Features and Benefits
• 127dB dynamic range RSSI
• 14dBm high efficiency PA
• 170dB maximum link budget
• 89dB blocking immunity
• Automatic RF sense and CAD with ultra-fast AFC
• Built-in bit synchronizer for clock recovery
• Built-in RF switch
• Built-in temperature sensor and low battery indicator
• Bullet-proof front end -12.5dBm
• High receiving sensitivity down to -148dBm
• Highly efficient integral impedance matching network
• Integrated LoRa modem semtech SX1262
• LoRa, FSK, GFSK, MSK, GMSK, OOK modulation
• Low RX current of 4.6 mA (Lora Operating Mode)
• Packet engine up to 256bytes with CRC
• Preamble detection
• Programmable bit rate up to 300kbps
• Provides full functionality of the RFIC
• Small form factor 23mm x 20mm
• Transmission of 22dBm at 118mA constant RF output
• Upto 20km range
• 14dBm high efficiency PA
• 170dB maximum link budget
• 89dB blocking immunity
• Automatic RF sense and CAD with ultra-fast AFC
• Built-in bit synchronizer for clock recovery
• Built-in RF switch
• Built-in temperature sensor and low battery indicator
• Bullet-proof front end -12.5dBm
• High receiving sensitivity down to -148dBm
• Highly efficient integral impedance matching network
• Integrated LoRa modem semtech SX1262
• LoRa, FSK, GFSK, MSK, GMSK, OOK modulation
• Low RX current of 4.6 mA (Lora Operating Mode)
• Packet engine up to 256bytes with CRC
• Preamble detection
• Programmable bit rate up to 300kbps
• Provides full functionality of the RFIC
• Small form factor 23mm x 20mm
• Transmission of 22dBm at 118mA constant RF output
• Upto 20km range
Certifications
• IIP3 rating
Specification
Attribute | Value |
|---|---|
| Receiver Sensitivity | -148dBm |
| Protocol Type | Lora |
| Supported Bus Interfaces | SPI |
| Supply Voltage | 1.6 → 3.3V |
| Dimensions | 26.95 x 19.95 x 1mm |